Kulp vs Falcon Cont...
 
Notifications
Clear all

Kulp vs Falcon Controllers

6 Posts
5 Users
0 Reactions
3,691 Views
Posts: 34
Topic starter
(@jbair)
Trusted Member
Joined: 5 years ago
[#57475]

Due to WIFI problems and the planned growth for next year I am looking to get a new controller. Preferably one that will play the show off of a card. I have some connections that are more than thirty feet from the controller so I will need remote boards (4). The rest of the props are under thirty feet from the controller.

The controllers that I am looking at are the Kulp K32A-B https://kulplights.com/product/k32a-b/ and the Falcon F16V5 https://pixelcontroller.com/store/featured/88-f16v5.html . I would appreciate any recommendations and thoughts about the choices above or recommendations on alternate controllers.

Each have their own pluses and minuses.

Thanks for your input

Jay


5 Replies
Posts: 1420
(@1pet2-9)
Noble Member
Joined: 6 years ago

The only bad thing I have to say about my Kulps are, Falcon is much simpler if you're running any DMX, LOR, moving heads, or Renard. If you just want to run pixels off a card, Kulp is simpler. Either can handle remote receivers.


Reply
Posts: 376
(@k-state-fan)
Reputable Member
Joined: 16 years ago

I use a mix of both in my display. Both are good. I do not use either you posted but the F16V3, F4V3 and K8PB have been solid for me. I like the efuse option on the Falcon.


Reply
Posts: 36
(@maraku)
Eminent Member
Joined: 6 years ago

In my honest opinion, I would be hesitant to buy a Kulp, or any other FPP based controller.
FPP changes a lot every year and software bugs keep happening (you can't stay on an old version because xLights only supports the latest versions).

If you're really unlucky then FPP will stop outputting full pixel counts to all ports and say it is unlicensed mid show.
That is an extreme example and it has happened a few times. It annoys me that the people behind licencing idea were willing to accept bugs which can cause consequences like that.


Reply
Posts: 34
Topic starter
(@jbair)
Trusted Member
Joined: 5 years ago

Attached is the layout for my controller, if that makes any difference.

Thanks


Reply
Page 1 / 2
Share: