Help Troubleshootin...
 
Notifications
Clear all

Help Troubleshooting

6 Posts
5 Users
0 Reactions
1,058 Views
Posts: 1420
(@1pet2-9)
Noble Member
Joined: 6 years ago

What I did was, I used 50-pixel strings. The shared PSU's are 100 pixels apart. When I probe voltage in the middle with all pixels off, the voltage is lower than either PSU. So there is no way my 5.2V PSU (for example) will drive reverse current into my 5.1V PSU. And it's just such a pain to break just one line there, when all I otherwise have to do is just connect the connectors. And of course I try to keep my PSU's more-or-less the same voltage, but I'm not perfectionist about it. So at least for now, if I am 5V and the PSU's are at least 100 pixels apart, I consider splitting the VDD line optional. But only then.


Reply
Page 2 / 2
Share: