The Ethernet Rx side has a solid yellow and the green side is blinking fast. On the optional output does it madder if it's set for 56kbs or 112kbs or 230kbs or DMx?
Yes test button give white lights, it's connected directly to my PC, and I believe I'm using a standard cat5 cable. As when I line up both ends I can see all the stand Colors are the same
If you can make one or find one, try it w/ a crossover cable
It's going to have to be tomorrow before I can get one
should be a straight cable not a cross over could be just something in vixen that isnt setup right can you post some screen shots of you vixen pages
Any PC made in the last 10 years is using a port that auto detects the ends and "Does the right thing". Crossover cables are not usually needed anymore.
Is there anything in vixen I should change to maybe make it work?
is the elements on the left side patched to the controller on right side click the plus button next to controller look and see if they have green dots on the channels
Yes the elements are linked and they are set to RGB

