kdoyon wrote:Do you have a link to those clear plastic conduit clips?
I am using these this year. So far, they seem to be doing a great job. Almost invisible when lights are not up. Super easy to snap in either EMT or PVC. Made of Lexan with UV inhibitors.
http://www.holidaycoro.com/Half-Inch-Lexan-Pipe-Mounting-Clip-p/770.htm
That's them. They're still up and holding.
Sent from my Moto G (4) using Tapatalk
Check out trimlights
https://www.trimlight.net/store/c2/Full_House_Kits.html
However omit the dumb RGB’s and power supplies (just use the pre drilled j channel) and order the 12v ws2811 version pixels in place of it. Use some 12v meanwell power supplies. Use the similar 12mm square style bullet pixels. I ordered mine from ray wu custom with 6 inch Spacing . Check my posts In this group and you can see the pixels in action with my megapixel controller.
If you can get the same / similar J channel then you can diy your own and have a very clean looking permanent Christmas light or seasonal look so your July 4th or sports themed house will be year round fun.
Not to put a plug post for my megapixel controller but one feature I am working on is a seasonal or the skies the limit effects that it will have and can be customized with. When it’s not receiving show data (aka vixen, lor, xlights etc) It will be ready to receive information from the raspberry pi or pc to tell it what preset to run. Red white and blue with random sparkle? No problem it will do it In an endless loop until you tell it otherwise. Control it from your phone . Endless possibilities....
Sent from my iPhone using Tapatalk
Thanks! Very helpful.
