Gutter pixel mounti...
 
Notifications
Clear all

Gutter pixel mounting options

23 Posts
13 Users
0 Reactions
11.3 K Views
Posts: 326
Topic starter
(@robertb)
Reputable Member
Joined: 17 years ago
Drewfus wrote:Pvc pipe with j hooks here no issues with the ice and wind

You have a pic of the backside? Boy that would be quick and easy for sure! Is is a cutaway on the back? What is your spacing on the nodes and what is the wire spacing? Any videos?


Reply
Posts: 74
(@drewfus)
Estimable Member
Joined: 12 years ago

Yes they are just a j shape they just hook over the gutter. My spacing is 2.5 inch on center. In 1" pvc pipe. The wire spacing is the standard that Ray Wu sells on his 5v nodes Video of them working here https://youtu.be/q-pvHbSJ27o

Sent from my iPhone using Tapatalk


Reply
bcstuff
Posts: 449
(@bcstuff)
Reputable Member
Joined: 16 years ago
bcowan wrote: The plastic clips can get weak when it gets warm outside so next year I am going to use "The gutter hook" from Christmas-LEDs.com to secure the 1/2" EMT.

Nice find, I have looked at several other solutions instead of the plastic, only last one year, clips and most were pricey. These are not to bad on price. Thanks for sharing!

The Shingle Hooks look good too:
http://www.christmas-leds.com/category_v3.aspx?categoryID=388


Reply
Posts: 277
(@blake-l)
Reputable Member
Joined: 19 years ago
bcowan wrote:I used the PixaTrim from BOSCOYOSTUDIO.com. It zip ties to 1/2" EMT and then I zip tied it to plastic gutter clips. The plastic clips can get weak when it gets warm outside so next year I am going to use "The gutter hook" from Christmas-LEDs.com to secure the 1/2" EMT.

I did almost the same, except to attach to the gutters, I cut 12" sections of J-trim and zip tied it to the conduit, upside down - it hooks over the gutter nicely. I was worried about it blowing off, but there is a lip on the trim and the gutter that work together, but it still comes apart easily. 10' sections of conduit with waterproof connectors at each end made it easy(ish) to imstall and remove, even on a 2 story house. There are slots in the trim that I used zip ties through, and the stuff is cheap. I can try to get a pic later if anyone is interested - my display is down, but not yet stowed.


Reply
Posts: 383
(@aesl1982)
Reputable Member
Joined: 12 years ago
blake_l wrote:I did almost the same, except to attach to the gutters, I cut 12" sections of J-trim and zip tied it to the conduit, upside down - it hooks over the gutter nicely. I was worried about it blowing off, but there is a lip on the trim and the gutter that work together, but it still comes apart easily. 10' sections of conduit with waterproof connectors at each end made it easy(ish) to imstall and remove, even on a 2 story house. There are slots in the trim that I used zip ties through, and the stuff is cheap. I can try to get a pic later if anyone is interested - my display is down, but not yet stowed.

Is like to see a picture

Sent from my iPhone using Tapatalk


Reply
Page 4 / 5
Share: