bcowan wrote:I used the PixaTrim from BOSCOYOSTUDIO.com. It zip ties to 1/2" EMT and then I zip tied it to plastic gutter clips. The plastic clips can get weak when it gets warm outside so next year I am going to use "The gutter hook" from Christmas-LEDs.com to secure the 1/2" EMT.
How do you attach your lights to the Eve's of the house?
rx7man wrote:How do you attach your lights to the Eve's of the house?
I screwed small zip tie anchors every 3 feet and zip tie the EMT to them. This was the first year for the pixels. When I take them down I am going to cut the wires at every 10 foot section of EMT and put weather proof connections. This way I can leave the PixaTrim, EMT and Pixabulbs all together in 10 foot sections. This will make it easy to store and to put up next year.
bcowan wrote:I screwed small zip tie anchors every 3 feet and zip tie the EMT to them. This was the first year for the pixels. When I take them down I am going to cut the wires at every 10 foot section of EMT and put weather proof connections. This way I can leave the PixaTrim, EMT and Pixabulbs all together in 10 foot sections. This will make it easy to store and to put up next year.
You have a link for the zip tie anchor? All I can find are the square adhesive ones. (I've used them in the past, but the screw hole is not re-enforced and screws can push through the hole)
burtonmadness wrote:You have a link for the zip tie anchor? All I can find are the square adhesive ones. (I've used them in the past, but the screw hole is not re-enforced and screws can push through the hole)
Here are the ones I used. I did not have any failures and we had ice and 40 MPH winds this year.
https://www.tessco.com/products/displayProductInfo.do?sku=393865&eventPage=1



