Good RGB controller...
 
Notifications
Clear all

Good RGB controller for a Pixel Beginner?

10 Posts
6 Users
0 Reactions
3,240 Views
Posts: 15
Topic starter
(@jaronervin)
Eminent Member
Joined: 12 years ago
[#54613]

Hello!

I’ve been running Christmas light shows at my house for a few years now, with Renard SS24s and plain white lights. I’m looking to slowly convert over to RGB pixels, starting with maybe one or two elements this year.

I’m having a hard time grasping how to choose the right controller and pixel combos, and was hoping someone on here would have some advice for me! Is there a pixel controller that would be somewhat compatible with my existing Renard hardware? One that is relatively easy to learn on? One (or two) that could handle 16 50-pixel strings for a tree element?

Thanks!


9 Replies
Posts: 40
(@swanny)
Trusted Member
Joined: 6 years ago

I started out with an espixelstick v3.

This year I’ll be running

1x kulp k16a-b ( with 2 remotes ) ( 16x50 strands for tree + 3 presents & star on one remote and 4 candy canes on the other remote)

9x espixelstick v3’s in FPP remote. ( for windows & garage doors in my house. )

Sent from my iPhone using Tapatalk


Reply
Posts: 128
(@sctwohig)
Estimable Member
Joined: 10 years ago

I started out with Espixelsticks, and 2 Falcon Pi Hats. Then I added some Kulps. The Kulps can't be beat. A k8 or k16 are nice starting points with either 8 or 16 local ports depending on which model you go with, they are pretty inexpensive and can connect 3 differential receivers, which allows for some expansion as you grow. The Pi Hat is also nice, I like that it can connect directly to Renards but it is limited to just 2 pixel ports, and is not expandable.

Last year my show included 2 pi hats, 2 renard SS 24s, 1 Kulp 8 with 3 differential receivers, a kulp 8 with 1 differential receiver, a kulp 4, 20 espixelsticks, and a kulp pocketscroller. This year I am also planning on adding some things to my neighbors yard so will be adding a pb16 with a differential receiver or 2, and creating a larger mega tree that will be controlled by another pb16.

Thanks,
Shawn


Reply
Posts: 1420
(@1pet2-9)
Noble Member
Joined: 6 years ago

If you really want beginner, you can go with a China special, like a T1000S. But Xlights or syncing to music will be out. You just plug the pixels in, hit a few buttons, and it runs pre-programmed sequences. For some people, that's as much time as they want to spend on this. You'll be out $20 if you change your mind later


Reply
Posts: 15
Topic starter
(@jaronervin)
Eminent Member
Joined: 12 years ago
1pet2_9 wrote:If you really want beginner, you can go with a China special, like a T1000S. But Xlights or syncing to music will be out. You just plug the pixels in, hit a few buttons, and it runs pre-programmed sequences. For some people, that's as much time as they want to spend on this. You'll be out $20 if you change your mind later

I appreciate the idea! Last year’s setup was 48 channels and 6 or 7 songs. My goal this year (if possible) is to replace my 16 string mega tree with a pixel setup, so I would need compatibility with Vixen as well.


Reply
Page 1 / 2
Share: