Notifications
Clear all

Getting started

44 Posts
12 Users
0 Reactions
10.5 K Views
Posts: 602
Guest
(@bwinter)
Member
Joined: 10 years ago

Will it work? Probably (hard to be certain, since it's just an image)

Is it most suited for the application you're intending? Probably not.

You should probably sketch out what you're planning to do, then spec out the parts afterwards. Hard to know "what's best/ideal" if it's not exactly clear what you're planning.


Reply
TazChaLet
Posts: 3042
(@tazchalet)
Famed Member
Joined: 13 years ago

yes the power supply in that case is like the ones we all use here in this hobby


Reply
stallionent
Posts: 1460
(@stallionent)
Noble Member
Joined: 13 years ago

If I was starting out, and had the $$$ I would buy two 12 volt 350 watt power supplies, one Raspberry PI3, one F16v3 controller and some WS2811 LEDs.


Reply
Posts: 1592
(@ruppro)
Noble Member
Joined: 11 years ago

Go to https://auschristmaslighting.com/ and register, then download their "101 Manual" that is about the best beginners manual for lighting displays


Reply
Posts: 68
(@nathan815)
Trusted Member
Joined: 10 years ago
stallionent wrote:If I was starting out, and had the $$$ I would buy two 12 volt 350 watt power supplies, one Raspberry PI3, one F16v3 controller and some WS2811 LEDs.

This is my first year and that's exactly what I bought a few months back! Definitely the nicest way to go IMO. I love the F16v3. And Falcon Player. And xLights.


Reply
Posts: 1344
(@mrsmoofy)
Noble Member
Joined: 12 years ago

Seems to have started a new thread now with the same subject. I don't see this going well for him 🙁


Reply
Posts: 740
(@ezellner)
Prominent Member
Joined: 11 years ago
Ruppro wrote:Go to https://auschristmaslighting.com/ and register, then download their "101 Manual" that is about the best beginners manual for lighting displays

Definitely go here. It's a consolidated manual that will get you started. Once you understand all the hardware, software and terminology, you will be able to use this site much more effectively. You need to do some homework first.


Reply
Posts: 283
Topic starter
(@lamar-bolen)
Reputable Member
Joined: 9 years ago

Thanks

Sent from my SM-N910T using Tapatalk


Reply
MartinMueller2003
Posts: 7615
(@martinmueller2003)
Illustrious Member
Joined: 14 years ago
Lamar bolen wrote:So I don't need a rasbarry

Sent from my SM-N910T using Tapatalk

It depends on how you want to drive your show. At design time you have a computer on which you create a sequence. At show time you have a show computer (PC, Raspberry PI, MAC, something) that connects to controllers that drive the lights. For me, It is cheaper to use a PI ($40) to drive the controllers than a PC ($400).


Reply
Posts: 283
Topic starter
(@lamar-bolen)
Reputable Member
Joined: 9 years ago

I was going to get a pi

Sent from my SM-N910T using Tapatalk


Reply
Page 2 / 5
Share: