pythan wrote:I saw that when I mounted mine but in the end it really didn't make much difference. I just made sure that I had a long one at the peak point on all my peaks.These video were not to show case the Plasma Icicles so they don't have any close ups.. but I think you can get the idea.
https://drive.google.com/folderview?id=0B6NUVBSuPrXUanROcXRnZ2lWM0E&usp=sharing
If you are making your own, I would suggest longer than 18" spacing. If I did it again, I would do 24-30".
Very nice! Good job on the sequencing too. Why would you use 24" - 30" spacing instead of 18"?
I was thinking the opposite. But I want to try to do text and graphics. 3 or 4 inches apart and 15 pixel drops. Hummmmm......
The diyledexpress one's you will be able to twist. But that's only half your issue. And the fixes I see are not without other side effects.
Sent from my SCH-I545 using Tapatalk
Craig talks about the programming of the number of channels being the reason for the spacing, and wishing there were fewer channels. I wish I had done two things differently. 12, 10 and 8 pixels rather than 14, 10 and 6, with 4" spacing rather than 8". I'd really like to be able to scroll text, but with 8" spacing it just isn't readable.
Jeff
Skunberg wrote:I was thinking the opposite. But I want to try to do text and graphics. 3 or 4 inches apart and 15 pixel drops. Hummmmm......
The diyledexpress one's you will be able to twist. But that's only half your issue. And the fixes I see are not without other side effects.
Jeff Millard wrote:Craig talks about the programming of the number of channels being the reason for the spacing, and wishing there were fewer channels. I wish I had done two things differently. 12, 10 and 8 pixels rather than 14, 10 and 6, with 4" spacing rather than 8". I'd really like to be able to scroll text, but with 8" spacing it just isn't readable.
Now, that would be pretty cool having text and/or graphics scrolling across the entire width of the roof line of the house.
This post by djulien got me going on that train of thought. Nice video of text on a roofline.
http://doityourselfchristmas.com/forums/showthread.php?31051-Renard-retrofit-for-WS2811-12
Skunberg wrote:This post by djulien got me going on that train of thought. Nice video of text on a roofline.
That is a trip!
tmarshal61 wrote:Very nice! Good job on the sequencing too. Why would you use 24" - 30" spacing instead of 18"?
Thanks...
I would use the longer ones for a few reasons.
1. Since I cut all mine from cables I wound up tossing a lot of cable... would have been just as easy to keep a few more inches on the Icicles.
2. I ran into a few places were I need to use a 3' extension just because I was a few inches short. Since I don't have just a flat roof line, that happened in a few places.
3. If I had wanted to feed from the other end I could have because I would have been able to twist the cables around and still keep the distance.
Mine worked out fine and I am very happy with them.. but the change is only if I were to do them again..
tmarshal61 wrote:Now, that would be pretty cool having text and/or graphics scrolling across the entire width of the roof line of the house.
For me.. I am glad I did not do the close in set up.. I just don't see text as being Christmasy... Fun to play with technically.. but display wise.. not for me..Just my personal taste. Also, that is a heck of a lot of pixels at a 4" pitch..
Skunberg wrote:This post by djulien got me going on that train of thought. Nice video of text on a roofline.http://doityourselfchristmas.com/forums/showthread.php?31051-Renard-retrofit-for-WS2811-12
OK.. I loved the effects.. not the text so much.. but the density of the effects is great!
Now where's the bank for that many pixels? 🙂 Text is kinda a bonus for me, tune to or announcements. I don't think I could use it like karaoke or anything, that's not me. But to replace 4 different color icicles it would be great and cheaper that four sets of LED icicles, red, green, blue, white.
