Falcon controller s...
 
Notifications
Clear all

Falcon controller setup for pixel tree

12 Posts
4 Users
2 Reactions
1,059 Views
MartinMueller2003
Posts: 7613
(@martinmueller2003)
Illustrious Member
Joined: 14 years ago

There is a philosophical debate about whether zig-zag should be done in the sequencer or in the controller. It is up to you (the user) to decide which you like better. I use both depending on the situation. I love the virtual string functionality on the Falcon controllers. I can adjust the strings on my trees to align with my failed attempts at getting leg one at the correct location.


Reply
Mudsculpter
Posts: 1214
Admin
Topic starter
(@mudsculpter)
Member
Joined: 19 years ago

After I had sequenced a group of songs to include this year, I didn't think to configure the strings as I was really in a crunch about migrating from vix2 and learning new software (vix3) and needed to start grinding out new pieces for the show. I didnt know how it would affect the sequencing if I went back in and deleted the megapixeltree and reinstalled it with the new configuration.

Just for kicks, is there a way to change the zigzag without major copy/paste this and save/delete that? I was about to ask about it but you gave me a simpler solution...


Reply
MartinMueller2003
Posts: 7613
(@martinmueller2003)
Illustrious Member
Joined: 14 years ago

Vixen has a patch zigzag function that makes it very simple.


Reply
rstehle
Posts: 4348
(@rstehle)
Illustrious Member
Joined: 19 years ago

Not sure why you have every other port reversed. IMO they should all be forward. Then indicate 73 in the Zig Cnt. box.


Reply
Mudsculpter
Posts: 1214
Admin
Topic starter
(@mudsculpter)
Member
Joined: 19 years ago
rstehle wrote:
Not sure why you have every other port reversed. IMO they should all be forward. Then indicate 73 in the Zig Cnt. box.

At some point I was going to look into the controller settings minutiae but I felt I needed to learn vix3 as I have been a vix2 holdout


Reply
Page 2 / 3
Share: