ESPixelstick V4 wi...
 
Notifications
Clear all

ESPixelstick V4 with Lan input

2 Posts
2 Users
0 Reactions
986 Views
Posts: 227
Topic starter
(@ajventi)
Reputable Member
Joined: 10 years ago
[#58063]

I am building a new prop for this year and think a ESPixelstick V4 will work. I only need a controller that will handle about 100 ws2811 pixels. I not a really into wifi yet. I do have two pixelsticks that I use as standalone controllers. I would like to know if anyone has a way to use a pixelstick with a lan e1.31 input. If so would you let me know if it can be done. If not, can you suggest a small controller that I can use.

Tony


1 Reply
MartinMueller2003
Posts: 7612
(@martinmueller2003)
Illustrious Member
Joined: 14 years ago

There are 5 or 6 Ethernet based platforms that have ESPixelStick V4 Software prebuilt for them. Start up the FlashTool and look at the list of platforms and you will see some with (Eth) in the name. You can also add your own platforms to the list (or ask to have one added).


Reply
Share: