ESPixelstick V4 Pix...
 
Notifications
Clear all

ESPixelstick V4 Pixel Count

9 Posts
3 Users
0 Reactions
1,730 Views
eddylightsup
Posts: 117
(@eddylightsup)
Estimable Member
Joined: 7 years ago

Martin,

When you mention the caveat for the V2 - An ESP8266S based processor can be used on the V2 base card and will run V4 software.
What would be needed to make that happen -- what module would have that? Is that the typical ESP01S modules with the 1Mb flash?

I'm asking all these as I have several V2 ESPixelsticks, NodeMCUs (ESP8266) and a couple of V3 ESPixelsticks.
And, I also have several variations of the ESP modules. ESP01, ESP01S.
I'm trying to inventory what I would need for playing with pixel props. And what are the limitations on each of the controllers/modules.


Reply
MartinMueller2003
Posts: 7614
(@martinmueller2003)
Illustrious Member
Joined: 14 years ago

you need the esp01s with 4MB of flash, the flashtool has a prebuilt image for it. BUT it still has the major weakness that makes the v2 sticks/pops almost useless. it is missing the sd card which then causes you to congest your wifi.


Reply
eddylightsup
Posts: 117
(@eddylightsup)
Estimable Member
Joined: 7 years ago

OK, got it, Understand about the wifi congestion. Is there a way to read the ESP and know what size flash memory they have?


Reply
MartinMueller2003
Posts: 7614
(@martinmueller2003)
Illustrious Member
Joined: 14 years ago

attach it to the flashtool and try to upload, the kog will display the info downloaded from the esp.


Reply
Page 2 / 2
Share: