Is the max pixel count per port or is it the total per board? Could I have 680 pixels on port 1, 2, 3 and 4?
For ESP V4 it is per device
ESP8266 = 1200 pixels
ESP32 = 3000 pixels
The ESP32 versions allow you to assign those 3000 pixels to any ports in any quantity that add up to no more than 3000. So yes you can put 680 pixels on each of 4 ports.
Thank you for the quick reply.
Hello Martin,
A follow up question -- on the ESPixelstick V3 (ESP32) devices would I have to run the ESPixelstick V4 firmware to be able to drive the 3000 pixels? Would the V4 Firmware also be needed on the ESP8266 devices (NodeMCU, ESPixelstick V2, etc) to get to the 1200 pixels?
Thanks,
Eddy
Only V4 supports that many pixels. V4 does run on the V3 hardware, V4 does NOT run on V2 or V1 hardware.There is a caviate to this, An ESP8266S based processor can be used on the V2 base card and will run V4 software.
