espixelstick V3 pro...
 
Notifications
Clear all

espixelstick V3 programming help needed

4 Posts
3 Users
0 Reactions
1,975 Views
Posts: 186
Topic starter
(@knightrohulk)
Estimable Member
Joined: 13 years ago
[#52818]

I've purchased some espixelstick V3's, but I haven't programmed them yet. I have V2s already and have used a USB-TTL to program them following these instructions: http://forkineye.com/wp-content/uploads/2016/09/ESPixelStick-V2-Assembly-and-Usage.pdf . However, for the V3's, it looks like there's a micro or mini USB connector instead? I'm not sure how to go about programming the V3s. Do I use this tool: https://github.com/forkineye/ESPSFlashTool ? Thank you!


3 Replies
Posts: 8517
(@angus40)
Illustrious Member
Joined: 15 years ago

Yes use the tool . The usb simplifies the connection .
You may need to install a driver for the Wemos ch340 chip
https://docs.wemos.cc/en/latest/ch340_driver.html


Reply
Posts: 9
(@rmore)
Active Member
Joined: 8 years ago

Take a look at this video: https://youtu.be/FqGbrHAUyVQ


Reply
Posts: 186
Topic starter
(@knightrohulk)
Estimable Member
Joined: 13 years ago

Perfect!! Exactly what I needed along with the Wemos link from angus40. And, it also helps if you have the right micro USB cable. Not all micro USB cables are created equally apparently. The third cable I tried worked. Thank you both for your help! Now I can get back to setting up lights and xLights programming....

rmore wrote:Take a look at this video: https://youtu.be/FqGbrHAUyVQ

Reply
Share: