ESPixelStick Power ...
 
Notifications
Clear all

ESPixelStick Power options

15 Posts
9 Users
0 Reactions
6,775 Views
Kev7274
Posts: 2037
Topic starter
(@kev7274)
Famed Member
Joined: 13 years ago
[#45333]

I've been using using a 12v 3A power supply that when I try to use it gives me a dim red glow on my pixels. Used my regular power supply and everything was good.

I tested all 4 power supplies,and the ones (2) that gave me a red glow was putting out 12.42v. The ones (2) that worked was putting out 12.28v. Not sure if that little of overage would cause the issue. As you can see,half worked. Not sure I want to take a chance of half of them working if I got more. Using the pvc pipe to get everything together was kind of big and I would like to keep things as small as possible.

I'm thinking of using one 12V 360w power supply to run them. How many pixels strings could I run on just one power supply? I plan on using around 15 strings this year for different displays. Another option is to use smaller power supplies and put them in a CG-500.

If you have any suggestions on power setup,let me know.


14 Replies
Kev7274
Posts: 2037
Topic starter
(@kev7274)
Famed Member
Joined: 13 years ago

Thanks for the info. The farthest display would be around 30ft away from the main power supply. If I can run all 16 strings off that one PS,that would be great. I would just need to run power to each Pixelstick.


Reply
DrNeutron
Posts: 2018
(@drneutron)
Noble Member
Joined: 14 years ago

Just a quick note that running 16X50 (800) pixels is over the 4 universe limit on the ESPixelstick (680). You may have issues with that many on one controller. I'm sure Sporadic can speak up as to the limit. I ran 480 off one last year with no issues....I would do some testing and report back how you fare with that many on one controller.


Reply
Posts: 2507
(@mrgrumpy)
Famed Member
Joined: 12 years ago
Kev7274 wrote:................(2) that gave me a red glow was putting out 12.42v.......................

Kev, test your 12.42V units with 10-12 feet of cat5 #24 or something similar in size/length. That size and length should give you enough voltage drop to allow your lights to work, without the red glow.


Reply
Kev7274
Posts: 2037
Topic starter
(@kev7274)
Famed Member
Joined: 13 years ago
mrGrumpy wrote:Kev, test your 12.42V units with 10-12 feet of cat5 #24 or something similar in size/length. That size and length should give you enough voltage drop to allow your lights to work, without the red glow.

OK,I'll try later.


Reply
Posts: 1344
(@mrsmoofy)
Noble Member
Joined: 12 years ago

If you decide to go smaller power supplies I still have some Mean Well small power supplies available. Voltage is adjustable for your red glow issue. https://holiday.lighting/


Reply
aknflyer
Posts: 371
(@aknflyer)
Reputable Member
Joined: 10 years ago

We have used just a simple rectifier diode to drop voltages. Just be sure it is rated for the current you are pushing. Align the striped side (cathode) towards the pixels, non striped side toward the + on the power supply.
Looks like the Axial style (round tube like a resister) is good to 6A, Like a NTE589 or NTE572 1.3V drop@6a. A NTE6804 is rated to 35Amps but is more like a stud, with a .55v drop.
Do not use a resistor, it will generate heat. And has a variable voltage drop depending on the current being pulled in different parts of the sequence.


Reply
Posts: 100
(@little-b)
Estimable Member
Joined: 9 years ago

Quick follow up question for connecting power to the ESPixelstick. Can I power the ESPixel Controller from the run of pixels instead of running a direct line from the power supply? I have a strand of 12v ws2811 pixels running up and down the peak over my garage. I have the power injection at the top powering about 40 pixels down each side. Currently I have a run with 3 null pixels connected on the left side going to my Sandevices e6804 40ft away. I would like to eliminate this long run and use the ESPixel controller.

ESPixelstick

Reply
Posts: 2507
(@mrgrumpy)
Famed Member
Joined: 12 years ago

yes you can. Here is a suggested wiring picture

ESPixelStickWiring

Reply
Posts: 1592
(@ruppro)
Noble Member
Joined: 11 years ago
Little_b wrote:Quick follow up question for connecting power to the ESPixelstick. Can I power the ESPixel Controller from the run of pixels instead of running a direct line from the power supply? I have a strand of 12v ws2811 pixels running up and down the peak over my garage. I have the power injection at the top powering about 40 pixels down each side. Currently I have a run with 3 null pixels connected on the left side going to my Sandevices e6804 40ft away. I would like to eliminate this long run and use the ESPixel controller.

Yes you can power the PixelStick from the pixel string. Recommend that you connect the +V and -V to the fused side


Reply
Page 1 / 2
Share: