espixelstick max am...
 
Notifications
Clear all

espixelstick max amp

4 Posts
3 Users
0 Reactions
4,090 Views
Posts: 375
Topic starter
(@gocats7)
Honorable Member
Joined: 18 years ago
[#51549]

The espixelsticks I have include a 5A fuse but is the the safe max? I ask because, as an example, the sandevices e682 come with 5A fuses but can (as I understand it) safely handle up to a 7.5A fuse so I am curious if there is any room to increase on these?


3 Replies
Posts: 1592
(@ruppro)
Noble Member
Joined: 11 years ago

Power drawn from the Controller should stay under 5 Amps, if you are running at or over that you will be needing to Power Inject any way well before you reach the limit.

But a good rule of thumb is to never exceed 80% load so 4A would be the max you want to push through the fuse.


Reply
Posts: 375
Topic starter
(@gocats7)
Honorable Member
Joined: 18 years ago

got it, makes sense.


Reply
jchuchla
Posts: 8698
(@jchuchla)
Illustrious Member
Joined: 15 years ago

I seem to remember Shelby saying at one time that the safe limit is above the 5A it's fused for by default. I know some of mine are fused higher. Though I can't recall what the magic number is off hand.


Reply
Share: