ESPixelstick and ES...
 
Notifications
Clear all

ESPixelstick and ESPGECE

17 Posts
8 Users
0 Reactions
6,120 Views
Posts: 555
Topic starter
(@zaker)
Honorable Member
Joined: 19 years ago
[#44110]

I saw that the ESPixelstick has a newer firmware, is it interchangeable with Bill Porters ESPGECE??

I do have ES8266-01's, and was wondering if I can use the new firmware.


16 Replies
Posts: 92
(@adster)
Estimable Member
Joined: 11 years ago

I have the Bill Porter ESPixelStick GECE's also and I have the same question! I did read in the configuration thread that someone tried to update to 2.0 but didn't have any luck, rolled back and everything was fine.


Reply
Posts: 555
Topic starter
(@zaker)
Honorable Member
Joined: 19 years ago

I am building another one now, I will put Bill's sketch on it to test, then try the new firmware. Might have to look at the files to see what's different between the two.


Reply
Posts: 2507
(@mrgrumpy)
Famed Member
Joined: 12 years ago

Bill Porter's and Sporadic's firmware are not interchangeable. They use a different pin of the ESP to send data.
I did hack a few boards to make them work with the latest Sporadic's Flash Tool and V2.1 firmware.

Not clear to what boards you are using......Take a look at these two threads. You may need to use different flash or hack your board. Hope these cover your issue.
http://diychristmas.org/vb1/showthre...ter-s-Original
http://diychristmas.org/vb1/showthre...ll=1#post70821


Reply
Posts: 555
Topic starter
(@zaker)
Honorable Member
Joined: 19 years ago

Thanks for the links, will check them out.


Reply
Page 1 / 4
Share: