ESPixel WiFi Issues
 
Notifications
Clear all

ESPixel WiFi Issues

5 Posts
2 Users
0 Reactions
1,461 Views
Posts: 360
Topic starter
(@jlstout)
Reputable Member
Joined: 16 years ago
[#49954]

So, I am running GECE ESPixel sticks on my house and my neighbors house. I have a Ubiquiti outdoor AP. The strings on my house work correctly for the most part, but some of his do not. I am getting a lot of packets lost and one string not really responding. I suspect it is a WiFi issue because we have a lot of trees in both our yards. I am leaning towards buying a second AP for his house. Should I set this up in repeater mode, or as a standalone and change the SSID on it and the pixel sticks to run on a seperate wifi? I also bought a couple of cheap wifi repeaters I was going to try tonight.

Am I going to get a lag if I run his stuff off a repeater?

Thanks in advance.

Jeff


4 Replies
Posts: 108
(@irishale)
Estimable Member
Joined: 12 years ago
JLStout wrote:So, I am running GECE ESPixel sticks on my house and my neighbors house. I have a Ubiquiti outdoor AP. The strings on my house work correctly for the most part, but some of his do not. I am getting a lot of packets lost and one string not really responding. I suspect it is a WiFi issue because we have a lot of trees in both our yards. I am leaning towards buying a second AP for his house. Should I set this up in repeater mode, or as a standalone and change the SSID on it and the pixel sticks to run on a seperate wifi? I also bought a couple of cheap wifi repeaters I was going to try tonight.

Am I going to get a lag if I run his stuff off a repeater?

Thanks in advance.

Jeff

"Am I going to get a lag if I run his stuff off a repeater?".... most likely, I did when I tried it. Most of your cheap repeaters are single radio, which are not good for real-time communication. Mine were dual band, and I used the 5ghz for the repeater, and it still didn't help. Now I have another AP I put out in my yard (same SSID, different channel) and just run a LAN cable along with the power cord. Problem solved


Reply
Posts: 360
Topic starter
(@jlstout)
Reputable Member
Joined: 16 years ago

When you say different channel, do you mean on the AP? I just ordered another Ubiquiti AP to put in my neighbors yard. How do you keep from having conflicts with the ESPixel sticks maybe connecting to both or?


Reply
Posts: 108
(@irishale)
Estimable Member
Joined: 12 years ago

Yes, on the AP. On the 802.11 b/g/n networks in the US you typically use channels 1, 6, and 11. This provides adequate separation so there is less interference. The APs can have the same SSID and password, but be on different channels.. The ESPixel sticks will then pick whichever one is strongest at boot to connect to. You might have to use a WIFI sniffer on a phone or tablet to see what channels are least congested in your neighborhood (I use "wifi analyzer" on my android.)

I don' know how long you plan to leave this AP set up, but I'd get outdoor-rated LAN cable just to be on the safe side to save wear and tear from the sun and rain/etc.


Reply
Posts: 360
Topic starter
(@jlstout)
Reputable Member
Joined: 16 years ago

Only for Christmas. Thanks for your help. I will try it out when I get the new AP.


Reply
Share: