The Universe 1 @ 170 pixels = 510 channels so Your set pixel count should be 100 for your 2 x 50 count pixel strings and the channel boundary stays at 510 🙂
Your Universe # setting needs to match what you configure in your sequencer for that controller's channels .
512 is set only if you are using Universe(s) of single dmx channels .
covewi wrote:In the ESPixelStick dashboard I currently have 1 universe - start channel 1- Universe boundary 512 and pixel count at 170 (this seemed to be the defaults).
I want to connect 2 - 50 node pixel strings together.
Do I leave the universe setting at 1 - and double the boundary to 1024 and pixel count to 340?
Set the following:
Universe: 1
Start Channel: 1
Universe Boundary: 510 (not 512)
Pixel Count: 100
This will tell the PixelStick that you have 100 pixels (Pixel Count) and that it should look for data from your software (like XLights or Vixen) for Universe 1, and that the software assumes the first pixel in your 100 pixel string is Pixel 1, so that the first channel of data (the level of Red) is for that first pixel (Starting Channel).
The trick to understanding Universes and Channels and Pixels is to realize that, while ESPixelSticks and other pixel controllers listen for DMX data from software, they don't send DMX data to the pixels. That means, things like the ESPixelSticks are protocol droids... errr... converters. They listen for DMX and translate that to "WS2811" protocol. So all these settings and weird terms are actually just parameters for the protocol converter.
Hope that helps!
Sent from my iPhone using Tapatalk
Thanks for the mini tutorial - it worked out perfectly!
I am having trouble doing the following. I want to use one RASP Pi (FPP) to control two different PixelSticks.
First, can that be done? If so, is the attached FPP E1.31 setup correct?
The first PixelStick will control the eves C9's and the second PixelStick will control the porch pillar lights.
If the above will work how do I set up an xLights sequence for two different sticks?
The sequence is basically two strings - each being controlled by two different sticks.

