ESPixel Stick Probl...
 
Notifications
Clear all

ESPixel Stick Problems

14 Posts
5 Users
0 Reactions
12.3 K Views
Posts: 793
Topic starter
(@covewi)
Noble Member
Joined: 17 years ago
[#51349]

Its been a year and I honestly forgot how to program my ESpixel Stick. What info do I enter in the SSID and Passphrase fields in the Flash Tool?
Programming says its complete but unable to connect to the DHCP so it times out.

Any suggestions - thanks

Screen Shot 2019 10 18 at 9.31.46 PM

13 Replies
ukewarrior
Posts: 4674
(@ukewarrior)
Illustrious Member
Joined: 18 years ago

SSID = name of your wifi network
passphrase = password of your wifi network

Enter the same values as you would on your laptop or PC.

Without these, you'll never connect,


Reply
DrNeutron
Posts: 2018
(@drneutron)
Noble Member
Joined: 14 years ago
covewi wrote:Its been a year and I honestly forgot how to program my ESpixel Stick. What info do I enter in the SSID and Passphrase fields in the Flash Tool?
Programming says its complete but unable to connect to the DHCP so it times out.

Any suggestions - thanks

The SSID and passphrase is the SSID and passphrase for your access point/router.
The espixelstick connects to the wireless network you define. The SSID is the name of the wireless network being broadcast by your AP/router. The password is the security WPA/WPA2 password you defined for the wireless network.


Reply
Posts: 793
Topic starter
(@covewi)
Noble Member
Joined: 17 years ago

Thanks - that was easy. Am I using the correct serial port setting?


Reply
Posts: 793
Topic starter
(@covewi)
Noble Member
Joined: 17 years ago

Up and running - thanks.


Reply
Posts: 793
Topic starter
(@covewi)
Noble Member
Joined: 17 years ago

Any reason why the USB to UART option doesnt show up?
I have re installed the latest Silicon Labs software and still no luck?

Since I dont see the ESPixel Sticks available on Amazon anymore - does anyone know where to purchase them?
Otherwise, what would be a good alternative and easy to use?

Thanks


Reply
ukewarrior
Posts: 4674
(@ukewarrior)
Illustrious Member
Joined: 18 years ago

There are DIY options and other folks make and sell variations of the original pixel stick.
The DIY option (pixel pop) is available from me and the other variants you can most likely find by google searching pixel stick.
I'm sure others will reply with actual links.

covewi wrote:Any reason why the USB to UART option doesnt show up?
I have re installed the latest Silicon Labs software and still no luck?

Since I dont see the ESPixel Sticks available on Amazon anymore - does anyone know where to purchase them?
Otherwise, what would be a good alternative and easy to use?

Thanks


Reply
Posts: 5
(@weinrich)
Active Member
Joined: 14 years ago
ukewarrior wrote:There are DIY options and other folks make and sell variations of the original pixel stick.
The DIY option (pixel pop) is available from me and the other variants you can most likely find by google searching pixel stick.
I'm sure others will reply with actual links.

Here are the two boards that I use in my display:

ESPixel Pop / ESPixel Pop Tiny (aka: Pixel Pop / Pixel Pop Tiny) - Link

Renard Plus ESP Pixel Controller Kit - Link

There are certainly others.


Reply
Posts: 793
Topic starter
(@covewi)
Noble Member
Joined: 17 years ago

Thanks for all your help - I received my Ray Wu WS2811's https://www.aliexpress.com/item/1953361881.html?spm=a2g0s.9042311.0.0.1af84c4duizgpR today.
They are beautiful.


Reply
Posts: 793
Topic starter
(@covewi)
Noble Member
Joined: 17 years ago

In the ESPixelStick dashboard I currently have 1 universe - start channel 1- Universe boundary 512 and pixel count at 170 (this seemed to be the defaults).
I want to connect 2 - 50 node pixel strings together.
Do I leave the universe setting at 1 - and double the boundary to 1024 and pixel count to 340?


Reply
Page 1 / 2
Share: