Notifications
Clear all

E682 vs e6804

11 Posts
6 Users
0 Reactions
10.3 K Views
wilmar
Posts: 2115
Topic starter
(@wilmar)
Noble Member
Joined: 8 years ago
[#51008]

Needing advice
Curious as to any major difference between the two . I tried to read up but I don’t understand the language . Hoping someone could dumb it down for me . Or recommend based on experience.
6804 is newer version from what I gather and can control more lights if I’m interpreting it correctly.

Sent from my iPhone using Tapatalk


10 Replies
TazChaLet
Posts: 3042
(@tazchalet)
Famed Member
Joined: 13 years ago

the 682 is a 16 port controller

E682 Measured 250x250

where as the 6804 is only 4 ports

E6804 Measured 250x250

Reply
wilmar
Posts: 2115
Topic starter
(@wilmar)
Noble Member
Joined: 8 years ago
TazChaLet wrote:the 682 is a 16 port controller where as the 6804 is only 4 ports

Thank you guess that’s why it’s cheaper

Sent from my iPhone using Tapatalk


Reply
rayhjr
Posts: 972
(@rayhjr)
Noble Member
Joined: 12 years ago

I believe they both have the same processor. They control the same amount of pixels just 4 ports on one and 16 on the other one. That's my understanding, could be wrong.

Sent from my SM-G900V using Tapatalk


Reply
pmiller
Posts: 2795
(@pmiller)
Famed Member
Joined: 12 years ago

You can also change the network resistors on the 682 for longer runs. Also, the 6804 uses 5-12 volts and the 682 uses 5-24 volts. Both will power 2040 pixels total using unicast and 1,190 pixels multicast. The 682 can also be powered by 2 different power supplies which will allow you to control 5 and 12 volt pixels at the same time.

Sent from my SM-T710 using Tapatalk


Reply
Page 1 / 3
Share: