Am I thinking correctly on this?
The e682 has a 2 amp fuse on each of the 16 outputs. In theory you cannot power a 12v. 50 pixel string from an output if you run it at all white.
50 pixels x .55 watts each = 27.5 watts or 2.29 amps. So based on this you can only run about 42 pixels.
Please correct me if I'm on the wrong path.
Thanks, Ed
Hey Ed,
I believe you're wrong on the fuse amps.
According to the E682 Manual... "The E682 will generally be shipped with 5 amp fuses installed in the 16 pixel string fuse locations... The 17th fuse is 2 amps, and protects the E682's electronics."
All of my E682's and 6804's have 5 amp fuses where you connect the pixels.
Paul
Thanks Paul, must have read it wrong.
Makes me feel better about purchasing one and at those amps could easily do 100 pixels.
Ed, remember if you power inject the string at the end of let's say 100 pixels (normal to inject on 5V pixels every 50) the E682 will only have to supply half the total power that the string requires. So 100 pixels @ .06 amps per pixel = 6 amps at full white so the E682 has to supply 3 amps, the power supply would supply the other 3 amps. I ran 200 5V pixels on one port last year and injected at 3 spots in the string and the E682 only had to supply about 3 amps.
Gary
Thanks Gary, good point!
Ed
