A few questions about pixels in a string. These questions apply to the e682 and strings with 2811 controllers.
1) What is the maximum number of pixels that can be on a string? I have a string of 300, but can it also be 600, 900, etc? Like in a single string that might outline a house eve.
2) Is using one connector, with a 240 pixel string on 2-1, the same as using 60 pixel strings on 2-1, 2-2, 2-3 and 2-4? I mean, is there anything to be gained or lost by either method. In Vixen 3, for instance, a single string can be programmed as multiple strings, just by which pixels you define for which strings. So the question about connector use, popped up.
3) Null pixels. If someone uses a null pixel, I would assume you still have to count it, as part of the string, even though you never intend to turn it on. Correct? And you would have to account for it in all your programming software, like declaring it a null-string and never assign a sequence effect to it. Correct?
I sure wish there was more time till Christmas. Got a late start on this and won't have anything done for this Christmas. But I have a year to prepare for next. Might put up a small display for Valentines day, since that's my GrandDaughter's birthday. 😉 Today is cable building day. 😉
Easy one first #3 your correct, most people forget about the sequencing software so your spot on. #2 Yes they are the same but you'll have power injection about every 50 pixels, some people use more connectors to prevent having to inject power. #1 Check the manual but I believe you can have the controller max pixel limit on one connector. Of course you wouldn't be able to plug anything else in, you'd have to power inject, and there is a timing issue that you may notice a delay between the first and the last pixel (pretty much for sure a issue in our example). From your questions I'd say you have a pretty good handle on this.
Brian
Yes, null pixels do have to be counted even if you don't intend to illuminate them.
I use a cmos chip wired as a buffer in place of null pixels. It doesn't reduce costs but for those of us with OCD and psychologically irritated by having pixels we won't be lighting, it's a nifty option 🙂
http://www.doityourselfchristmas.com/wiki/index.php?title=Null_Pixels
The e682 has an option to add a null pixel without adding it into your sequencer. You can make the change in its web page.
You do *not* count null pixels at the sequencer level - - that's really the whole point of having them as 'null' vs a plain 'ol unused pixel...
Just want to be sure you realize that you'll need power injection with longer strings. With 12v pixels you can probably go about 100-ish before needing injection - maybe more - maybe less - YMMV
