E682 not responding
 
Notifications
Clear all

E682 not responding

6 Posts
3 Users
0 Reactions
1,914 Views
Posts: 8
Topic starter
(@scarcebigfoot)
Active Member
Joined: 9 years ago
[#47131]

My e682 setup page will not display. The web page keeps saying "not responding" Now the e682 is stuck in a test pattern. Unplugged it, reset the I.P., unplugged it again, restarted computer. Nothing helps. Could it be the browser? My internet connection is wifi. Cat5 from show computer to Ethernet switch to controller. It just happened out of the blue. Was working fine until I left it on a test pattern for about 30 minutes. Any help would be much appreciated. Thank you.


5 Replies
Posts: 70
(@jchancel)
Trusted Member
Joined: 11 years ago

If you go into your router, do you see it showing up there?

Sent from my P00A using Tapatalk


Reply
Posts: 8
Topic starter
(@scarcebigfoot)
Active Member
Joined: 9 years ago

I’m not sure if I can go into the router homepage. It’s just a little 5v job that gets power from the controller board. I plugged it back in this morning and it’s still stuck in a test pattern. I will eliminate the router and go straight into the controller next.


Reply
Posts: 8
Topic starter
(@scarcebigfoot)
Active Member
Joined: 9 years ago

I’m not sure if I can go into the router homepage. It’s just a little 5v job that gets power from the controller board. I plugged it back in this morning and it’s still stuck in a test pattern. I will eliminate the router and go straight into the controller next.


Reply
Posts: 297
(@emkllk)
Reputable Member
Joined: 15 years ago

any way you can get cat5 from show controller to the e682 - that way you can at least determine if trouble is with the controller or the router. if you can't get to the show computer, do you have a laptop or something you can take to the controller and direct wire? That's what i would try anyway. try to get to the e682 homepage from direct wire


Reply
Page 1 / 2
Share: