e681 Resistor netwo...
 
Notifications
Clear all

e681 Resistor network

11 Posts
7 Users
0 Reactions
4,520 Views
Materdaddy
Posts: 2368
(@materdaddy)
Famed Member
Joined: 16 years ago
mschell wrote:best way to find these is to use Octopart.com It will look at all the distributors.

These are the L083SxxxLF part numbers. I'm not at home, but will be there by tomorrow. I probably have some equivalents as well....

Mouser doesn't seem to carry the 270 ohm one, but Arrow and a few other places do. L083S271LF is the manufacturer part number

They carry an equivalent one made by Xicon though: http://www.mouser.com/Search/ProductDetail.aspx?R=268-270-RCvirtualkey21980000virtualkey268-270-RC

It is a network, 8-pin .1" spacing, SIP, 2% tolerance. Unfortunately it's a bit more than the 330 ohm version. If you're already placing a mouser order, it might be better to just add them in. If you're ordering *only* these, it's likely better to buy them elsewhere.


Reply
buymyemu
Posts: 638
Topic starter
(@buymyemu)
Prominent Member
Joined: 16 years ago

Thanks guys, I don't know hardware, so wasn't sure what crosses with what. I most likely lost these myself and have to order other parts anyway so i can just add these.


Reply
Posts: 1249
(@jstjohnz)
Noble Member
Joined: 17 years ago

If you PM me your address I will send you a set.


Reply
budude
Posts: 10400
(@budude)
Illustrious Member
Joined: 18 years ago

In a pinch you can fold over some 1/4 or 1/8W resistors with a 1/4" or so left on the lead and pair them up into the sockets. I do this for my 1809 strips with straight jumpers as they don't work with the resistor packs.


Reply
Materdaddy
Posts: 2368
(@materdaddy)
Famed Member
Joined: 16 years ago

I'm finally assembling a second one of these from a group buy and it appears I didn't get the 220 ohm resistor networks for RN1 and RN2. Instead of eight 270 ohm resistor networks and two 220 ohm networks I got 10 270 ohm. It seems the 220 are for current limiting the LEDs, would I be OK to simply use the 270 ohm networks and have slightly dimmer indicator LEDs?


Reply
Page 2 / 3
Share: