E6804 with XLights
 
Notifications
Clear all

E6804 with XLights

11 Posts
5 Users
0 Reactions
3,823 Views
Posts: 5
Topic starter
(@scott70123)
Active Member
Joined: 11 years ago
[#40909]

So I got in the E6804 kit and put it together, everything seemed to go well. Ran the test patterns on some pixels, and everything worked great. Then I tried controlling them from XLights and started having some problems. I set up two strings from output 2 and got some weird results. Only about half of the second string lights up and the lights that do light up dont seem to be functioning correctly, lots of blinking and colors that arent supposed to be in there. The two strands worked perfectly using the test pattern from the controller so Im assuming it isnt wiring. When I look at the page for the controller it shows that universe one received 16750 packets with 4 sequence errors. Oh yeah, and I have the first string being powered through the controller and the second string being powered fromm the power supply. Any ideas on where I should start troubleshooting ?


10 Replies
Posts: 5
Topic starter
(@scott70123)
Active Member
Joined: 11 years ago

Also one more question. When you inject power into lights, do the power cords from the strands still connect together just with power added where they join, or do you just connect the strands to the power supply separately like I have them ?


Reply
Xenia
Posts: 1358
(@xenia)
Noble Member
Joined: 15 years ago

What is the length of each string and post your setup page on the E6804.


Reply
Posts: 339
(@heldwhat-christmas)
Reputable Member
Joined: 15 years ago
Scott70123 wrote:Also one more question. When you inject power into lights, do the power cords from the strands still connect together just with power added where they join, or do you just connect the strands to the power supply separately like I have them ?

The grounds need to be connected together... There are some good pic's on the wiki that illustrate how to power inject based upon your setup: http://www.doityourselfchristmas.com/wiki/index.php?title=Power_Injection


Reply
Posts: 1049
(@phrog30)
Noble Member
Joined: 12 years ago
Scott70123 wrote:So I got in the E6804 kit and put it together, everything seemed to go well. Ran the test patterns on some pixels, and everything worked great. Then I tried controlling them from XLights and started having some problems. I set up two strings from output 2 and got some weird results. Only about half of the second string lights up and the lights that do light up dont seem to be functioning correctly, lots of blinking and colors that arent supposed to be in there. The two strands worked perfectly using the test pattern from the controller so Im assuming it isnt wiring. When I look at the page for the controller it shows that universe one received 16750 packets with 4 sequence errors. Oh yeah, and I have the first string being powered through the controller and the second string being powered fromm the power supply. Any ideas on where I should start troubleshooting ?

If the lights worked good from controller in test mode, but didn't work right when controlling with xlights, then you have issues with xlights. Perhaps post pictures of your setup and/or post your xlights files (xml).

James

Sent from my SM-G900V using Tapatalk


Reply
Page 1 / 3
Share: