Dumb RGB Pixel Cont...
 
Notifications
Clear all

Dumb RGB Pixel Controller

9 Posts
4 Users
0 Reactions
3,053 Views
Posts: 693
Topic starter
(@davdue)
Prominent Member
Joined: 19 years ago

The Reb48LSD is still cheaper and I don't mind having to build it. In fact I like that. Any other smaller DIY controllers that I could use for some snowflakes? I seen things about raspberry Pi but what does that take for dumb RGB pixel strings?

Sent from my iPhone using Tapatalk


Reply
Posts: 3735
(@algerdes)
Famed Member
Joined: 15 years ago
TazChaLet wrote:I just found a 36ch dmx dumb pixel controller online for like $70 https://www.amazon.com/Channel-Decoder-Controller-Digital-Display/dp/B0111QLPLY

If you are going to use "dumb RGB strings/strips" -

Did you check out http://www.holidaycoro.com/30-Channel-DMX-Controller-for-RGB-Lights-12v-DC-p/40.htm?

I just put together 4 boxes with 2 of these in each (8 controllers total). They are working great.

(Others sell similar/same boards, as well.)


Reply
Posts: 1592
(@ruppro)
Noble Member
Joined: 11 years ago

DIYLEDEXPRESS.com has a full kit and breakout boards that takes 3 rj45 and gives you 4 RGB outputs.

http://www.diyledexpress.com/index.php?main_page=index&cPath=35&zenid=77eca198a91e078c2f8f864051bcb220

davdue wrote:Another question. How do people connect the strings to the Ren48LSD? I see something about a 3 connector breakout board and Renard plus has a single but at 10.50 for the board that's a little steep for 12 of them.

Sent from my iPhone using Tapatalk


Reply
Posts: 693
Topic starter
(@davdue)
Prominent Member
Joined: 19 years ago

Cool I hadn't seen the breakout board from DIYExpress. So 3 of those would do my 12 strings.

Sent from my iPhone using Tapatalk


Reply
Page 2 / 2
Share: