I have been reading all of the Wiki's about RGB and Pixels. I currently have 2 Olsen 595 boards. If I want to start doing RGB control do I have to start over with Renard64's or can I use the REN-T & REN-C to convert my Olsens and use them with DCSSR's? Right now all of my strings are incandescent bulbs. I have been hesitant to switch to LED's because of the added cost and questions of longevity. I currently buy all of my lights at Walmart after Christmas. I started out in 2009 with 48 of my 64 channels and now have 122 channels used. Any suggestions of how to economically switch to LEDs would be appreciated. I am at the max of my current electrical service with my existing setup.
Dave:
I would think that what would drive any decision here is not LEDs, but whether you want to support dimming and/or whether you want (or, more likely, need) to move away from the parallel port.
The REN-T and REN-C give you dimming from a standard serial port. What you choose to put behind them is your decision.
Insofar as household-voltage LEDs, I have had no problem with them in my six seasons over seven years. I have eight strings of 50-counts that I've used each year and have added more and more every year (this year I added 1620 more 110v LEDs and now have a total of 5560 of them as strings, icicles and nets).
For dimming smoothness, I do use incandescent lights as snubbers with many of them and for my icicles and net lights did buy those from Creative Displays. But plenty are just plain 'ole strings from Target or Home Depot or Lowes and run without snubbers.
HTH.
\dmc
dmcole wrote:I would think that what would drive any decision here is not LEDs, but whether you want to support dimming and/or whether you want (or, more likely, need) to move away from the parallel port.
I have been considering dimming for a couple years now. The main reason I haven't jumped over is the time it would take to reprogram all of my songs. Plus I have become pretty good at on/off programming but dimming seems like a whole different world. With all that said I see all the videos on YouTube and dimming makes the show so much better. It adds a complete new dimension to things.
dmcole wrote:Insofar as household-voltage LEDs, I have had no problem with them in my six seasons over seven years. I have eight strings of 50-counts that I've used each year and have added more and more every year (this year I added 1620 more 110v LEDs and now have a total of 5560 of them as strings, icicles and nets).
From what I have seen at Walmart is 60 count LEDs that are the about the same length as their 100 count incandescent counterpart. Plus they are about 3 times the price. I have heard some complaints of people having problems with the LEDs working fine the first year and then having issues with them working the next year. This was from friends who don't do blinky-flashy. Do the household LED strings operate like incandescent with a series parallel wiring or are they all in parallel. Just wondering how you troubleshoot them and replace LEDs when they go out.
I really like the vibrant colors that LEDs give you and think I need to change over I just don't look forward to the cost of replacing the incandescent strings. But if I can start with switching out some props a little at a time then the cost wouldn't be as prohibitive. However I still need to know if I can control dumb RGB with my setup if I change the SSRs from AC to DC (12V).
