I have 30mm ws2811 pixel (from Ray Wu) lighting permanently installed along my eaves and roof line. I control them with LOR Pixie 16 during my Christmas show and I have a basic RGP bluetooth controller that I switch to on the off season for other light purposes. I still have a few others that I have tried and used, but so far I like the Alitove/LED Hue controller and app for ease of use and functionality.
The problem I have is the lack of customization and timer of the Alitove controller and app combination. I'm just looking for a little more.
I'm looking for something I can set calendar and time schedules and be able to customize the colors and effects from a phone. I have seen where others log onto the home wifi network and that's not a problem.
The wiring and switching between the two is already done and working. I'm just looking for another option when I'm not running the LOR network.
Does anyone know of or used a controller/app that I can swap out that would fit my purposes here?
Thanks for any help or advice.
Andrew
I'd also recommend FPP on a raspberry Pi. You can get an PiCap pretty cheap and connect the pixels directly to the board. As mentioned, you can sequence in Vixen or xLights and create schedules, but you can also create test "patterns" if you want to manually turn the lights on a single color or a simple chase. I've used it in the past for permanent pixels under my parents deck. It was easy enough for them to understand.
MikeKrebs and jem5136,
Thank you both.
I'll take a look at the FPP on the pi. I've been wanting to get a new pi anyways so this might be a good time to get a couple (lights on one and retro on the other).
