Hey all,
We hit -20F this week. Now i've got a bunch of dead pixels. They are the 5v from Ray Wu.
I'm wondering if anyone else in the deep freeze of the north has issues with cold. How do you handle it?
5v vs 12v wars aside, I'm wondering if I should be looking at 12v for the extra little bit of heat they generate on standby. I keep my system powered 24/7 for that reason. The PSU in the controller boxes keep the controllers warm enough through this. but of course the wee pixels are out on their own. this is my first year, so maybe its just your typical pixel death and nothing cold related, but until this week, all my testing and such has been going fine. They have been powered up for about a month straight now.
thanks!
J
Strange, usually cold helps electronics to keep working..
However, -20f and Chinese Quality control has me wondering.
My show sees -20C every year and never have dead pixels afterwards.I usually get dead pixels on first power up of every season.. and sometimes after long rain
When you say bunches of dead pixels, are they in groups or generally individually scattered around your strings? How many are you talking about? Were you able to bring in string in from the cold that had dead pixels and see if they started operating at all in room temperature? If the pixels are still dead at room temperature, were you or did you try to take one apart to see if it looked like the components/wiring were still soldered/joined together? I believe Ray Wu lists temperature specs on his web site for the lights that he sells. At least he did until recently anyway. Whether of not that is accurate of not I don't have a clue.
I had -10 F last November here in Alaska. I typically put my lights on the house in very early October to avoid snow and ice. Granted they are 12v, but once I test them in October, they stay off until late November and I don't seem to have a problem with them related to temperature. I can't answer the 5v vs the 12v question. But if this was me, especially your first year with pixels, once I had a string that had a few dead pixels in it and I thought it was temperature related, I would start doing some temperature testing on that string and see what the results were. It could possibly be something else, but I would rule the temperature thing out first, then maybe try replacing a few of the dead pixels on the string so it is working again and then do another test outside in cold temperatures to see what your results were.
Probably not the answer you were looking for but I find that I was constantly having little challenges like this along the way on my Christmas lighting journey!:)
I deliberately left some 5V pixels on >40C weather in the off-season, and I'm seeing scattered always-blue pixels. About 1 per 250 pixels. A pain to splice them, but I need to know their limits.
The ones that are toast are on the Megatree and a couple props. I'm planning on pulling the props into the shop tomorrow when it "warms up" lol and see if that makes a difference and replace the suspect ones. This is their first real run and I was expecting a couple of dead ones. Just maybe not so fast. I've obviously made a big investment in 5v and would have to replace a bunch, but its a cold climate and you have to adapt. I've seen some pixels just stay yellow, so those are toast, but i can live with that here and there as long as they are passing on data.. Its the ones that dont keep passing data that are ruining props. Knock on wood, no strips or bullets way up high on the house have had issue. I'm just concerned about dead props halfway through the show season as i'm leaving mid dec to a vacation and the show will be running on its own.
