Crooked pixel tips ...
 
Notifications
Clear all

Crooked pixel tips normal?

28 Posts
13 Users
0 Reactions
7,333 Views
Posts: 335
(@cdanna77)
Reputable Member
Joined: 12 years ago

In my case it was slightly more than 1/2 string of lights that did not work( or work correctly)
Otherwise I would always repair a hand full of nodes if needed and never consider contacting him.


Reply
Posts: 928
(@arw01)
Noble Member
Joined: 13 years ago

I have bought pixels for 4 years from Ray, Paul, Todd, and David. All of them have a few pixels that have a lean, not had a single water intrusion issue. One of them (Todd or David) from orders 2 years ago had 3 pixels that did not have the epoxy fill, I cut them out and spliced in new ones.

I consider it unreasonable to expect 100 pixels at .21 or .25 each to be perfect, I pay $2.00 a pixel for those from Minleon, those are perfect for alignment.


Reply
Posts: 2507
(@mrgrumpy)
Famed Member
Joined: 12 years ago

I guess I have a higher level of expectation then most of you. I do not want to be checking every pixel or cutting out those bad ones. My supplier needs to supply high quality product at a competitive price. Watertight and "NO" 22 or 24 gauge wire either.

I understand there is a failure rate to expect but there is also need for a QC process, that these obviously failed to meet. This failed QC process should be a red flag on this supplier to the rest of us

Many say: he'll make them good....but I, or you, shouldn't be his QC, and wait for the replacement. Yes, he has a great reputation for correcting errors....Maybe too great! Meaning, too many people have had issues that needed correction. Another red flag.

Note: Now I sure I'll get slammed by all those that bought with no issues, but your comments are meaningless since we are dealing with the numbers of people that have issues with this supplier. This is one of them, and shows there is no QC process.


Reply
Posts: 259
(@cmschleich)
Reputable Member
Joined: 11 years ago

I agree with your mindset in life, but it seems in this hobby space this is the norm and most this stuff is relatively cheap. I have lost many hours this year (year 1) in troubleshooting and rework from non-standard parts, and also erroneous diagrams. I had assumptions that there were more standards in place, and specs provided are correct. I learned my lesson, now I test everything before soldering/connecting. Pixels, pixel wiring, and pig tails have been the source of most the erroneous variation. I'm surprised I have not fried more lights than I have (only a few). One of my first test strings came with no specs, no markings, I had to resend info requests multiple times to get a response (Seasonal Entertainment, I bought from them right before their site went going dark). That was 1 of several "welcome to the hobby" lessons, including my own errors.

This is also why so many suppliers (of any product) have liaisons that regularly visit the country/plant where the product is manufactured. To make sure it is made correctly, including the specified materials.


Reply
Posts: 383
(@aesl1982)
Reputable Member
Joined: 12 years ago

Crockeet fantasy of lights has a good supplier so far I have 7k pixels from him this year only one failure. The wire is 18awg. And the epoxy is nice and filled properly not like some where it's over flowed or bulging the sides of the pixel etc. maybe I'm just lucky

Sent from my iPhone using Tapatalk


Reply
Posts: 255
(@rogerh)
Reputable Member
Joined: 12 years ago

I bought pixels on eBay auctions 2 years ago. It can really make a difference who you buy from. I had one string that switched wire colors in mid string. Talk about messing with your mind. I lucked out and only lost a few pixels. I normally expect a 1 to 3 percent failure rate.


Reply
Posts: 317
(@spyder)
Reputable Member
Joined: 11 years ago

If those are the $25 per 100 strings I had one of those last year from Ray and it was perfect. Ordered another 6 x 100 strings this year and I have a few like that on each string but not quite so deformed. They all seem to work fine so far. Time will tell.


Reply
Posts: 171
Topic starter
(@dmjpixel)
Estimable Member
Joined: 11 years ago

To close the loop on this - I had a few other items to order from Ray so I sent a picture of the malformed pixels along with my order email and told him it was present on 3 strings. He said he would replace and include with my order and sure enough, enclosed in my box tonight were the items I ordered along with the 3 replacement strings. A very quick look and they appear to be in good shape - will perform tests over the next few days. Very pleased he took this measure...

Thanks to everyone who took the time to offer input - much appreciated!


Reply
Page 3 / 3
Share: