I just recently realized that the color if my arches was out if order. I have 240 of HC pixels I got in 2015 running off a si glen port of my F16v3. I have a test sequence that has all my props runjingba marguee pattern if red and white, however the arches were blue and white, I changed the output from RGB to BRG and now the color is correct. These should not be BRG. Any clued as to why this happened?
Is there a 510 vs 512 setting ?
Or you haven't account for correct number of channels in your sequence.
angus40 wrote:Is there a 510 vs 512 setting ?
Or you haven't account for correct number of channels in your sequence.
I had gone ba k and looked to see if I set the universe size wrong on the F16, it was right, but I had universe 27 start channel 13260 instead of 13261.
That makes perfect sense and I am sure you can see that your color order had shifted by 1 .
Great you found it .
Merry Christmas 🙂
angus40 wrote:That makes perfect sense and I am sure you can see that your color order had shifted by 1 .
Great you found it .
Merry Christmas 🙂
yeah, had to not said something about universe size i may not have found it. Thanks a bunch and merry christmas
