You said you were new to pixels and the question of how to repair has been answered. My advice to you is if you're going to have pixels, then at some point your going to have to make repairs, get use to it. Whether or not you choose to repair or ask for a replacement is entirely up to you.
It depends on when I find a problem pixel as to how I go about repair. I keep solder sleeves, and those 3m push on crimps on hand for a "show is running make a quick repair and take out last working one and first not working one" and keep things running.
If I'm on the bench testing them I'll find the problem as described about and just remove the bad one and solder it in and heat shrink.
Some people don't like even cutting a few extra off a prop just do they don't have the added splice, and that's fine if that's how they want to do thing. But somewhere down the line removing a bad pixel is going to have to happen. Might as well get into the habit if knowing how to find it and repair it.
Ray made some salient points! I'll add another.
Your time has value. You alone have to determine whether it's worth your time to repair strings when they go bad. Having the extra parts is worthwhile, but sometimes, the amount of effort required to make things right can become heroic -- in both the initial diagnosis and the eventual repair. Sometimes, the fastest and most sure fix is just to replace the darned lights.
Another sure-fire fix is to unplug them for good.
dirknerkle wrote:Another sure-fire fix is to unplug them for good.
Nooooo. Dark is bad 🙂
rayhjr wrote:You said you were new to pixels and the question of how to repair has been answered. My advice to you is if you're going to have pixels, then at some point your going to have to make repairs, get use to it. Whether or not you choose to repair or ask for a replacement is entirely up to you.
It depends on when I find a problem pixel as to how I go about repair. I keep solder sleeves, and those 3m push on crimps on hand for a "show is running make a quick repair and take out last working one and first not working one" and keep things running.
If I'm on the bench testing them I'll find the problem as described about and just remove the bad one and solder it in and heat shrink.
Some people don't like even cutting a few extra off a prop just do they don't have the added splice, and that's fine if that's how they want to do thing. But somewhere down the line removing a bad pixel is going to have to happen. Might as well get into the habit if knowing how to find it and repair it.
I started with building a grinch 15 years ago so no problems with cutting and repairing wires. My newbie status is in understanding the data and power flow in the strings. Yesterday 20 pixels worked 80 acted crazy, turn power off and on and 20 work 80 dead. I powered them up today and first 69 working, 70 dead, 71 constant red and the next 29 dead. After 5 minutes 69 working pixels, 70 turned on white, 71 still red and next 29 dead. 2 minutes later all 100 started working correctly. Could it be cold solder joints around pixels 20,21 and 69,70 causing this? I really don't want to return the string to Amazon, it has been a royal pain with shipping, it started when 2000 pixels were "undeliverable" 2 weeks ago and it hasn't got any better since.
thanks
Bob
I would replace 20/21 and the restart testing. FYI: Anything you see after a 'bad' pixel is random garbage. After 20/21 are replaced, watch for the next point at which the pixels are not behaving and replace those.
