I'm looking to make the switch from traditional LEDs to pixels next year and am not sure which ones to buy. I am going to start with C9's for the roof line and was thinking of going with Ray Wu but have recently read about a lot of waterproofing problems, even with his newer versions. So my simple question is... what brand of C9 pixels is best?
I'm new to pixels and new to the site and am excited to start! Thanks in advance for everyone's help!!!
-Jared
honestly. buy a string from each vendor, power them up and play with them before u buy mass amounts. some vendors actually offer test strings, usually 5 pixels. ws2811 is the most popular protocol...
Best Pixels is a bit of a loaded question .
Arguments can be made on voltage > 5 vs 12 and yada yada .
Your question may probably best be answered with another question ,
What do you plan to use for a pixel controller .
Stella Scapes green or black could be the best pixels available .
For the controllers commonly used on this site , the tls 3001 pixels trump all other in quality and performance .
The only con is they are 5v and will require power injection for long runs .
That's not a bad idea. Which vendors would you recommend trying? Other than Ray Wu, I'm not even sure who's out there.
RayWu, diyledexpress.com holidaycoro.com
Sent from my iPhone using Tapatalk
Both of the others are members here also
Sent from my iPhone using Tapatalk
angus40 wrote:Best Pixels is a bit of a loaded question .Arguments can be made on voltage > 5 vs 12 and yada yada .
Your question may probably best be answered with another question ,
What do you plan to use for a pixel controller .
Stella Scapes green or black could be the best pixels available .
For the controllers commonly used on this site , the tls 3001 pixels trump all other in quality and performance .
The only con is they are 5v and will require power injection for long runs .
I am thinking of going with the SanDevices E682. It seems to be a commonly used one, however I'm open to advice! How long can you go on 5V without power injection? If I wanted to stick with 12V what would you recommend?
5v you can go about 50, 12v about 100. But you will tear through wattage with 12v quicker. For roof line 12v is a better option, but your can always get creative with power infection depending on the setup of your roofline.
Sent from my iPhone using Tapatalk
Not to contradict Shaggy but I never understood the wattage argument. I have a very large display with several thousand dollars invested. My electric for the show runs less than $50 per season using only 12V pixels and led strings. Why would I even care that 12V may cost me $5 more for the season than 5V pixels. Go with the pixel that you like the best. I prefer 12V because I like to minimize the need for injection.
Not a/c wattage, but d/c wattage... The draw is still the same, relatively, but the consumption of wattage put out of the power supply is what is different. I'm not an electrician, so I'm sure there is a better way of explaining it...
Sent from my iPhone using Tapatalk
