Hey guys,
new guy here planning my house outline and had a few questions regarding the best bullet/highest quality pixel. I assume they're all made in China, so what is everyone running without issue? I've seen all the holidaycoro ones, but I've found some on Amazon ( https://www.amazon.com/addressable-Waterproof-Connector-500pcs-Raywu-Pigtail/dp/B09KZGLR75/ref=sr_1_1_sspa?keywords=ray+wu&qid=1692540258&sr=8-1-spons&ufe=app_do%3Aamzn1.fos.f5122f16-c3e8-4386-bf32-63e904010ad0&sp_csd=d2lkZ2V0TmFtZT1zcF9hdGY&psc=1 ) and was wondering if theres anything wrong with these? I was also wondering if this 500 light strip was OK, if there is any reason you can't chop these down into smaller lengths?
I've also heard of Ray Wu. is this a person, or a light model?
And last question...how is the quality of the "whites" with an RGB bullet? Do they make a RGBW bullet pixel to enhance the white or is that hot a thing? Seems like all I have come across is RGB.
:biggrin2:
Thanks again!
A lot of good info in this thread.
To answer some of your questions;
You will find many different answers on what people are running without Issues. There can be good and bad batches of Pixels from the same supplier.
Nothing wrong with those pixels and if you look deep the manufacturer is Paul Zhang.
You can cut them down to what ever count you desire.
Ray Wu is a person with a store at aliexpress who caters to the lighting community anong with Paul Zhang and others.
The question about the White is subjective. To some it's a big deal and to others like me it good enough for a light show. I can not
speak on the RGBW issue because I don't own any but they do exist, not sure if in a bullet form. I just don't know.
Good Luck. :thup:
Thanks for the thread link Ray!
I checked all the threads out, read the Aussie 101 guide and my head hurts from all the forums!
I've decided on this: https://www.aliexpress.us/item/2251832713804439.html?spm=a2g0o.store_pc_allProduct.8148356.17.58252bd7BZhSOs&pdp_npi=3%40dis%21USD%21US%20%2418.00%21US%20%2418.00%21US%20%2418.00%21%21%21%21%402103205316925696630707447e565c%2112000020740311345%21sh%21US%210&gatewayAdapt=glo2usa Edit, just kidding. The shipping is just as much as the lights. ^&%&^%!
Thoughts? 12v bullets pixels from Ray. 100' lengths, 4" spacing, starting out with around 1200 for my house outline and I'll go from there.
I'm also loving these PermaTrack strips! Exactly what I need! Very neat and clean. I am doing indirect light for the soffit outline (hence the side holes) and the verticals will be top holes with 2" spacing.
I'm still considering 2" spacing for my soffits and eaves, since I have a 2 story, and although the bullets will be facing the house, because they're 20'+ high, you'll still be able to see the bullets. I figure at a 30' slant distance, 2" spacing may look better. Meaning 2x the nodes!
My first year (2015) I only had a few Pixels and got in trouble more than once for being on the Pocket computer so much at work. Reading everything
I could trying to learn as much as I could. Channels.... Universes..... Controllers... I totally get the Brain Hurt.
Ray Wu is known for quality product and for combining shipping if you ask. Just tell him what you want and how many, and he will give you a shipping quote.
RGB MAN or Wired Watts are resellers in the states that often run sales or Minimum order bulk Buys that may save you money. There may be
lost of others out there that is just a couple that I am aware of.
I have no experience with the Perma Track, maybe someone else will chime in on that.
Good to know. I actually ended up ordering from Wallys. All the reviews and specs seem to be the same, and I assume they likely come from the sale place. I got a pixel tester too so I can test out the strips since I’ll be mounting everything first, then wiring it up and programming.
I know I paid more, but I don’t care. It’s all about convenience and easy returns if I have a problem.
IIRC, the Alling brand is one of the main Chinese suppliers we use in this hobby. He goes by the name of Paul Zhang. Many people order direct from Paul (in China). It is really hard to judge best pixel. No consumer reports for pixels.
Ray Wu sells on aliexpress. Long time supplier of hobby pixels. If you buy direct from China, always ask for a quote. The shipping estimator sometimes works but is often quite a bit off. Ray Wu is also likely the source behind many of the US sellers. Nice thing about most US sellers is that you good English customer service.
One thing about most of the Amazon and even the aliexpress sites is the wire size will likely be a crapshot even if they state AWG 18, you will get 21 or 22 gauge. And if they don't state it, it could as small as 24-26 AWG. So ask about the size of the wire in millimeter squared and understand what you are getting.
HC pixels are good. There is quite a bit of chatter on the forums about HC and depending on your personal standards, you should read up before buying so you understand the company you will be supporting.
Connectors are important. One companies pixels won't necessarily connect to another companies so be sure you specify your connector.
I would not buy 500 pixel lengths unless I had a 500 pixel length to cover. And at 500 pixels, you will have to power inject the back end and might still be short of power to power all pixels at full on (which hardly anyone actually does). I would try to get lengths that are close to what you will use. That being said, I didn't see how long each string was (500 bullet pixels would be very unusual). The picture (if accurate) looks to be about 100 pixels long. So, if you are getting 5x100, that would make sense. And you can use 100 pixel strings for lots of props and display purposes.
I like the white that I see in my pixels but I am not picky.
Here is nice list of suppliers related to this hobby:
https://www.sjlights.com/links/#pixelvendors
While there may be a lot of opinions on the "best pixels", there does seem to be a consensus that Wally's is a very solid re-seller of lights in the US, so I think this was a solid choice. Yep, you may have paid a little more than ordering direct, but like you, I value this extra cost with what comes with it. Stateside seller, easy to reach, good track record, and involved in the lighting community. I'm not advocating Wally's is the #1 by far, there are so many good choices, but do not think you can really go wrong with these as your first lights.
I've ordered from Ray Wu direct in the past. Very easy to work with, I have had great luck with his lights, and always works with me on shipping, which comes out much lower than the advertised Ali price. If you have time as you get deeper down the rabbit hole, he has some other unique offerings others may not stateside, and if you have some time, and order early in the year, may also be a good choice.
For permanent lighting tracks, have you checked out Your Pixel Store?
https://yourpixelstore.com/product/yps-bullet-track-15m-bundle/
They also have lighting tracks, and from what I have seen, another solid supplier to the light enthusiast community. The owner seems to be very engaged online and looking for new ways to help out his customers. I think he is the first stateside vendor to offer the 4 wire GS2808, which are not new, but a new offering at least to the masses. I actually ordered my GS2808 from Ray Wu in January for my permanent lights.
Thanks! I hadn't heard of those tracks, but I personally like the aluminum ones I found, that are similiar, but from Perma Track. It looks like Your Pixel Store is sold out of those anyways.
Whatever pixel I am not using, those are the best. I think what happens is, whenever the China QA folks find a pixel that doesn't pass muster, they put that string in an envelope with my address on it. The whole country does that.
