Addressable Festoon...
 
Notifications
Clear all

Addressable Festoon light

23 Posts
6 Users
0 Reactions
5,613 Views
Posts: 8517
(@angus40)
Illustrious Member
Joined: 15 years ago

Re: Addressable Feston light

Hey , hold the phone I think you may be correct .

I was fooled by the S14 at the link and figured I was seeing a pcb similar to some fixtures I already have .

But no . It is a diffuser that is the trickery .

Check this video , these internal diffusers appear to assist illumination for the outer clear bulb .

My apologies for jumping on this and allowing my eyes to deceive .


Reply
Posts: 418
Topic starter
(@richienorthcott)
Reputable Member
Joined: 7 years ago

Re: Addressable Feston light

This looks like a similar product:

The main takeaway is the S14 'bulbs' have 2 poles so I guess the control cable is 2 core. I'm not sure if the button he's pressing on the PSU is changing some aspect of the supplied power, or whether it's communicating with the bulbs via say bluetooth. I noticed he points the remote at the bulbs themselves.

I also found this on the UK Amazon site, which looks similar (set of 15 with 1 spare = 16)
https://www.amazon.co.uk/Armbracen-Waterproof-Changing-Backyard-Christmas/dp/B0BPHVCVQZ/ref=psdc_248561031_t2_B09JGSXQH5


Reply
Posts: 3735
(@algerdes)
Famed Member
Joined: 15 years ago

Re: Addressable Feston light

I, for one, am hoping that the industry is going to this type of situation. Screw in bulbs that receive their control down the same wire as the power.

The real "Plus" is the screw in bulbs for easy replacement. Unknowns are that we don't know how they will get their assignments (hopefully not like the old GECE bulbs where quantities in the string are limited). Since the bulbs are effectively connected to a bus, this will be very interesting as to how to work with them.

The few examples we have tried (so far) are "almost there". Unfortunately the response time is rather slow, but the possibilities are also encouraging.


Reply
Posts: 418
Topic starter
(@richienorthcott)
Reputable Member
Joined: 7 years ago

Re: Addressable Feston light

(Apologies I realise I misspelled festoon in the thread title!)

So we think these are genuinely 12V screw in LED units, that somehow receive their control data with the power (a little like DCC for railroad modellers, for example)


Reply
Posts: 6728
(@p-short)
Illustrious Member
Joined: 20 years ago

I edited the thread name...although the titles in the responses are unchanged.


Reply
Page 2 / 5
Share: