I bumped into these on AliExpress which looks like they could be hackable for a Christmas show....
https://www.aliexpress.com/item/1005005166016021.html
15 x RGBW LED festoon lights, addressable
I'm thinking there's a good chance they are using WS2811 protocol - looking at the connector it's 3 pin so 0v, 12v, data.
Does anyone have any thoughts? Is there a chance they could be using a different protocol?
I'm not sure if they are genuinely RGBW (so 4 channels per light) but maybe
I'm tempted to get a set to have a play with. I have an oscilloscope so could run some tests.
Re: Addressable Feston light
From just the pictures available, I only see 2 wires. Do you have a better image of the connector?
Re: Addressable Feston light
What I see is two multi-wire cables one going into the socket and the other out of the socket. It would be good to see a picture of the bottom of the bulb as well.
Re: Addressable Feston light
I doubt the s14 bulbs are WS28xx protocol .
They appear more like a phillips color bulb with a r,g,b,w circuit board inside .
you can see the pcb better here
Re: Addressable Feston light
Ah right- yes I agree it does look like a 2 pole connector, maybe I spotted the 3 pole one on other products I was looking at. So I would think either the controller communicates directly with each light, or the data and power are combined using some trickery. Also I noticed in the video the bulbs being 'screwed in', which suggests 2 pole.
The PCB link didn't work for me
I'll probably give this one a miss - but thanks for looking and for the tips!
