Address-able Pixel ...
 
Notifications
Clear all

Address-able Pixel Group

15 Posts
7 Users
0 Reactions
3,093 Views
MichiganLights
Posts: 479
Topic starter
(@michiganlights)
Prominent Member
Joined: 14 years ago
MikeKrebs wrote:I converted my RBL to pixels using four modules (3 rgb leds each) zip tied to a center pvc. Worked good. If my memory is any good (something doubtful some days), many of C7/C9 printed bulbs and the rbl adapters used about 7 pixels. Yep, found Bill Napier's here: https://cults3d.com/en/users/williamnapier/creations?page=2
There are smaller c9 covers that need even less.

Actually someone else linked to some of Bill's work , that's what got me thinking.

This is what I'm thinking, pixel puck.

https://www.aliexpress.us/item/3256801165766071.html?spm=a2g0o.productlist.main.77.3a46218bU2Jvb6&algo_pvid=3d1e0f7f-03bc-4875-b90a-9b857b640af5&algo_exp_id=3d1e0f7f-03bc-4875-b90a-9b857b640af5-38&pdp_ext_f=%7B%22sku_id%22%3A%2212000015787986224%22%7D&pdp_npi=2%40dis%21USD%213.5%212.94%21%21%21%21%21%40211bea6216741678465573878d0731%2112000015787986224%21sea&curPageLogUid=iAFSe2qXqYSm

Now the 5050 RGB SMD is that a unique node address (puck acts as a single pixel) or do I need to find 2081 driven pucks?


Reply
Posts: 3735
(@algerdes)
Famed Member
Joined: 15 years ago

Those pucks are single nodes with 9 LEDs. We use them in our post toppers. They are great!
One thing to watch out for is that the connectors that come with them are sometimes reversed. What you think should be the input (as in male) and what should be output (female) are reversed. Don't know why, but we figure it has to do with their original purpose. In any case, once we knew that, we were able to put about 50 of them to work.


Reply
MartinMueller2003
Posts: 7614
(@martinmueller2003)
Illustrious Member
Joined: 14 years ago

The 5050 is a tri-color LED package. It is essentially a DUMB RGB device that takes in three PWM signals and outputs visible light. The lens mixes the light to make the three discreet colors look like a single color. They are NOT pixels.


Reply
MichiganLights
Posts: 479
Topic starter
(@michiganlights)
Prominent Member
Joined: 14 years ago
MartinMueller2003 wrote:The 5050 is a tri-color LED package. It is essentially a DUMB RGB device that takes in three PCM signals and outputs visible light. The lens mixes the light to make the three discreet colors look like a single color. They are NOT pixels.

Would something like this work with ESPixelstick?

https://a.co/d/fJHIHDJ

I'm looking for cheap/simple pixel options for my props. Preferably without translucent lens like I see on the bullet style pixels.


Reply
MartinMueller2003
Posts: 7614
(@martinmueller2003)
Illustrious Member
Joined: 14 years ago

those are known as 3:1 WS2811 pixel strips. Three TRI-Color LEDs attached to a ws2811 driver chip.


Reply
Page 3 / 3
Share: