Hi all,
Nice hobby you got here. Glad I found this place, looks like a gathering of lighting experts 🙂
I'm thinking of ordering 15-20 floodlights from Ray Wu's store
These are 12V WS2811 controlled:

I am however wondering how to safely connect them. I guess parallel would be best but kind of a hassle soldering the wires.
I sent a message to mr Wu asking how much of these can be placed in series and how much current they draw.
The answer was, 10 in series without power injection and 0.75A at full white.
This is the circuitboard inside:

So placing 10 in series would mean drawing 7.5A @12V through that poor circuitboard ?
Isn't that a bit much ?
Thanks !
Those 'look' similar to ones I bought a couple years ago. I found that they had a significant delay for 'on', so I could not use them in my display. Do these delay or do they instant on like regular LEDs?
Well, I haven't bought them yet.
But by "delay for on" you mean a delay after turning them on / powering up ?
I have a similar led flood with remote that has such a delay. But changing the colors through the data line is instant, just like a WS2811/12 led strip.
Ehm, I removed an obselete attachment from my opening post and now the opening post has vanished...
RobG has the innards to make 10, 20, 50, and 100 watt versions:
https://www.tindie.com/products/RobG/pixelflood-20w-rgb-flood-light-ws2811-pixel/
MrExplore wrote:Hi all,Nice hobby you got here. Glad I found this place, looks like a gathering of lighting experts 🙂
I'm thinking of ordering 15-20 floodlights from Ray Wu's store
These are 12V WS2811 controlled:
I am however wondering how to safely connect them. I guess parallel would be best but kind of a hassle soldering the wires.
I sent a message to mr Wu asking how much of these can be placed in series and how much current they draw.
The answer was, 10 in series without power injection and 0.75A at full white.This is the circuitboard inside:
So placing 10 in series would mean drawing 7.5A @12V through that poor circuitboard ?
Isn't that a bit much ?Thanks !
You’re pushing the upper limit for 18AWG over any significant distance, but it shouldn’t catch fire. I’d worry more about your controller, as most are fused with 5A fuses per output. And keep in mind that you don’t have to run the floods at 100% brightness; dimmer means considerably less current running through the board.

