On 5v pixels how often do you power inject?
Is 24awg pixels able to work at all?
as a 5v user, i will say this. sometimes the savings between 5v and 12v isn't worth the headache. i use 5v on my matrix (1536 nodes divided across 4 ports) and my megatree (2880 nodes divided across 16 ports of 180 each). for me, using 5v on the above mentioned props keeps everything in close proximity making it easier to inject. i personally would not use them on props because of the needed pwr injection. if they are 24awg, you will for sure be injecting after every 50. i would also suggest that you DO NOT run them above 30% brightness as this will decrease the length of run before needing injection. at a lower brightness setting you may be able to get as many as 60-70 before needing to inject.
I use 5V pixels for 99% of my show. 24awg wire is a waste of time. I inject every 25 pixels. I inject every 25 pixels. However every injection point serves 50 pixels (25 left and 25 right). The wire from the PSU is 16 awg and feeds multiple injection points. My design is for 100% brightness.
Ray wu also has 20awg wire for a couple dollars more than the 24. If i up to that do you still think ill have to inject at 50.
My show is 100% 5 V pixels. I power inject every 50 pixels to ensure I can run at 100% intensity but in actuality, I only run at 50% which is plenty bright. I run 14 gauge wire for power. Most of my pixels are 18 gauge wiring from Ray Wu. Longest power run is about 30 feet.
