I've decided to use my CCP pixel strings with an E6804. I've used mostly 2811 up until now so, I'm not sure about a few things. First, can I typically run a single string at 300 pixels with power injection and without signal degradation? Or, should I break it up into shorter strings?
dariansdad wrote:I've decided to use my CCP pixel strings with an E6804.
I thought the CCP were actually 6803 pixels?
CCR s are. CCP s are 2801 an I have confirmed that
I thought they were 6803's also. If so Ron, the boxes in the back of my display were 6803's. I ran 384 of those pixels out of 1 output of the 682 with no problems. I did use power injection of coarse.
I'd like to note that when you get to high numbers like that you may notice lag. For instance if you use one string to outline your house you will notice the beginning comes on before the end. However if it's just the roofline and they are 100 feet apart you may not notice. So you may want to keep this in mind also.
Oops. I guess I should have mentioned that they will be used in a matrix. 12 high by 25 wide. The longest distance between pixels will be about 6". From controller to first pixel will be about 2' max with power right there.
I don't know that much about the 2801's. I'm just curious if they would work like the 2811's.
Thanks for the replies.
Ron
Ws2801's have four wires to include clock. They won't go as far without a null pixel. They are more stable (this is a quote I've seen more than once and I'm not sure what they mean). So they should work great for your matrix.
Can you explain what the "Clock" is? Since I use the WS2811 pixels, I've never dealt with the "Clock" feature, well except for the CCP Controllers, but that was all set up internally. Just plug them in, play a sequence and away you go. Is it a speed setting or something to that effect?
Clock is timing, kinda like zero cross on a controller. So it only really has to do with the protocol you use. Using ws2801 and ws2811 is the same, hook up the wires, tell the controller what kind of pixel is hooked up and play. All of the differences don't really change how you use them.
Thanks.
