Notifications
Clear all

16x50 mega tree

26 Posts
14 Users
0 Reactions
14.9 K Views
Posts: 145
Topic starter
(@perfection322008)
Estimable Member
Joined: 10 years ago
[#47961]

I'm wanting to do a mega tree for next year I'm thinking a 16x50 how many times would I have to inject power and would I need more then one power supply


25 Replies
TazChaLet
Posts: 3042
(@tazchalet)
Famed Member
Joined: 13 years ago

you dont have enough info to get the answers you want. what board are you thinking of using? how many ports on that board are you gonna? are you using 5v or 12v pixels?


Reply
Posts: 145
Topic starter
(@perfection322008)
Estimable Member
Joined: 10 years ago

It will be a ready to run controller at the moment I'm looking at this one https://www.pixelcontroller.com/store/index.php?id_product=50&controller=product and using 12 volt pixel


Reply
TazChaLet
Posts: 3042
(@tazchalet)
Famed Member
Joined: 13 years ago

you have several options you have 16 ports 1 string per port no power injection, 2 strings on 8 ports no power injection, 3 strings on 5 ports and 1 string on 1 port and you can power inject the ends of each set of 3 on the 5 ports, 4 strings on 4 ports power inject ends of each 4 string on each 4 ports you can go on you also can take just data and gnd from board off 1 port and power inject all the strings where needed


Reply
Posts: 61
(@goverland)
Trusted Member
Joined: 10 years ago

Run my 16x50 5v off one port Falcon PiCap (other port was star) and the rest of the elements off F16v3. Intensity et at 40% so I probably didn't need to inject, but did at top of the tree with a Falcon power distro board. As this was my first year I was experimenting a lot. Next year I'm going to keep my tree at 9.5 ft but go with 32x50 as I think I need better resolution. I also have three, four foot 8x25 which I will be doubling resolution to 16x25. I was worried about power injection, but it isn't such a hard thing, I had the Falcon F8 power distro board connected to strings 1-2,3-4,5-6,7-8,9-10,11-12,13-14,15-16 but probably should have done 3,5,7,9,11,13,15,16 with 16 also feeding the star. But because I allocated the second port of the PiCap to the star I had power through the PiCap.

Greg


Reply
Posts: 145
Topic starter
(@perfection322008)
Estimable Member
Joined: 10 years ago

Thanks


Reply
Posts: 274
(@akareaper)
Reputable Member
Joined: 10 years ago

16X50, 12V, off one port of my falcon, 3 additional PI points, NO ISSUES, and its 50 feet from controller.


Reply
Posts: 431
(@dkelly0802)
Honorable Member
Joined: 11 years ago

I have a 16 string by 50 nodes split up on 4 ports of a sandevice 6804 350 watt power supply no injection. Works fine most of the time lol.


Reply
Posts: 297
(@1983ss454)
Reputable Member
Joined: 16 years ago

I like to simplify things, I have each string running of a separate port on my E682, id rather build a new board then deal with all the power injection if not needed

Sent from my iPhone using Tapatalk


Reply
Posts: 145
Topic starter
(@perfection322008)
Estimable Member
Joined: 10 years ago
1983ss454 wrote:I like to simplify things, I have each string running of a separate port on my E682, id rather build a new board then deal with all the power injection if not needed

Sent from my iPhone using Tapatalk

I like the way you think


Reply
Page 1 / 3
Share: