akareaper wrote:16X50, 12V, off one port of my falcon, 3 additional PI points, NO ISSUES, and its 50 feet from controller.
is your psu on the tree or is that 50feet away as well?
1983ss454 wrote:I like to simplify things, I have each string running of a separate port on my E682, id rather build a new board then deal with all the power injection if not neededSent from my iPhone using Tapatalk
So, if you have a 16 string tree, how many cables run to your board?
I also run a single E682 for a 16X50 mega tree. One cable to each of the 16 ports on E682.
I run 20 strings of 50. Using 10 ports. 50 up and 50 down for each port. 12 volt pixels. 180 degree tree.
All our mega trees have their own controller, at the tree. 7 of the 9 trees currently have a controller output for each string. 2 of them have a "zig" so that there are 2 strings off of each controller output.
Problems that popped up this year were usually a pixel going bad on the two string/output trees. That would take out two strings from the tree. Very noticeable.
Those two trees will be converted to one string per output when they "come in from the cold" here in a few days.
Controllers are fairly cheap. Power injections work, but why bother when you have controller outputs capable of providing enough power for up to 120 pixels (12 vdc)? I know the controllers can handle 10 times the number of pixels we are asking them to per port, but needing to power inject, run the risk of a single pixel taking out a chunk of your display, slow frame refreshes, etc., makes one wonder why you would want to. I don't.
FYI - No power injection for 95% of our stuff. Loving it.
