Notifications
Clear all

16x50 mega tree

26 Posts
14 Users
0 Reactions
14.9 K Views
Posts: 274
(@akareaper)
Reputable Member
Joined: 10 years ago
rdj6107 wrote:is your psu on the tree or is that 50feet away as well?

My distro box that feeds the tree is 25 feet away.


Reply
Posts: 274
(@akareaper)
Reputable Member
Joined: 10 years ago

It's apples to oranges. I have 4 cables total run to my tree. Don't have multiple tree's so don't need multiple controllers. Whether a tree runs off 1 port or 16, a bad pixel will make a noticeable "Boo Boo" in appearance and has to be replaced anyway. Took me 3 minutes to fix an issue. walked outside, snipped the wires, removed a bad butt connector, installed a dolphin, walked away. So it comes down to doing what you are comfortable with.


Reply
Posts: 231
(@jeff-ott)
Reputable Member
Joined: 19 years ago

For my mega tree I plan on having spare 50 pixel strands ready to replace a bad one then bring the bad one into the shop to fix. Gets the show back up quickly and allows me to make a good repair in the shop. I'll run the whole mega tree and star on one differential receiver from my Falcon f16 and one 350watt PS. using 5vdc pixels.


Reply
Posts: 825
 DanJ
(@danj)
Prominent Member
Joined: 13 years ago

I did a 10' tall tree with 16 strands of 60 pixels per strand, ~210 deg setup. Used Boscoyo mounting strips with pixels 3" apart. Looked really good; normal viewing distance is about 35-50' from the street. I decided I wanted to minimize power injection in 2017, so I put one strand on each port of one of my F16s. The F16 output box (used the large ammo box) was busy but I liked minimal power injection. I had a 36" boscoyo five point star on this tree and had to power inject it. I also had to do one power injection on my roofline.


Reply
Posts: 297
(@1983ss454)
Reputable Member
Joined: 16 years ago
akareaper wrote:So, if you have a 16 string tree, how many cables run to your board?

I don’t run one central board, I place controllers at the elements. I have my E682 bolted to the mega tree pole and have single cables for each string running to my controller. My pixel tree line has the same, one controller mounts behind it and each tree has its own individual run.
These were setup before the falcon disto boards came out, I’m going to try to replace my E6804’s that run my house with Dave’s boards and use the 6804’s on New props out in the yard this year

Sent from my iPhone using Tapatalk


Reply
Page 4 / 6
Share: