12 volt pixel issue
 
Notifications
Clear all

12 volt pixel issue

7 Posts
3 Users
0 Reactions
2,632 Views
Posts: 5
Topic starter
(@msuirocks)
Active Member
Joined: 6 years ago

Thanks for all the replies, I took all your advice. I swapped ports, pigtails and tried all lights hooked together. I narrowed it down to the last 8 ports on the control board. After doing a reset and inputting all my configurations again, it solved the problem. I'm really not sure what caused it, but I'm glad it works now. Thank you again


Reply
rstehle
Posts: 4348
(@rstehle)
Illustrious Member
Joined: 19 years ago

More than likely you had overlapping channels............


Reply
Page 2 / 2
Share: