Trouble with PIC so...
 
Notifications
Clear all

Trouble with PIC software

18 Posts
6 Users
0 Reactions
13.7 K Views
Posts: 240
Topic starter
(@kwdelre)
Reputable Member
Joined: 17 years ago

I am trying to use this Programmer via a serial to USB adapter. Could this cause any problem? The LED is on showing power. I don't have a CPU to try a straight serial connection.


Reply
Posts: 240
Topic starter
(@kwdelre)
Reputable Member
Joined: 17 years ago

Just answered my own question

http://www.mcumall.com/forum/topic.asp?TOPIC_ID=1037

Won't work with the adapter. 😡

Before I try to take this adapter back, will i be able to use it with the Ren64 to run my show from a laptop?


Reply
Posts: 2214
(@ctmal)
Famed Member
Joined: 19 years ago

Assuming it's a typical usb-serial adapter it should work fine with the renard. I've run ren16's off of a usb adapter.


Reply
Posts: 3277
 Jrd
(@jrd)
Famed Member
Joined: 19 years ago
kwdelre wrote:I am trying to use this Programmer via a serial to USB adapter. Could this cause any problem? The LED is on showing power. I don't have a CPU to try a straight serial connection.

Do you Really mean Serial to USB or do you mean USB to Serial? If you mean the latter then you can use it for controlling your Renards from a laptop.


Reply
Posts: 240
Topic starter
(@kwdelre)
Reputable Member
Joined: 17 years ago

So I went to my dad's house to use his serial port and it literally took me 5 min. to install the program and program all of the chips. So frustrating to have spent 3+ hours wasting my time on something so easy. i bet this won't be the last time though :mrgreen:


Reply
Page 3 / 4
Share: