relewis wrote:Just a thought on this one. It would be good to have either a standalone pic with serial in and out, or and option in the base renard firmware that when no serial is received for a period (say of over 1 minute) that all outputs are turned on, so that if the PC crashes or is not available for other reasons I can still see my lights.
Rob
What about during the day when, presumably, no signals are sent out from Vixen to the Renard controllers?
-joni-
Ok, so it needs a real time clock that is automatically updated from the web that knows when daylight and nighttime are and turns it off at sunup. It should then make coffee and some toast- light brown, lightly buttered - oh and a bagel - with cream cheese - and maybe some fresh squeezed orange juice.... and for lunch....
Lets not get TOO out of control on this... 😉
relewis wrote:Just a thought on this one. It would be good to have either a standalone pic with serial in and out, or and option in the base renard firmware that when no serial is received for a period (say of over 1 minute) that all outputs are turned on, so that if the PC crashes or is not available for other reasons I can still see my lights.
Rob
One other disadvantage of this is where you may have x number of mini-trees each wrapped with R,G,B, &W -- you might overload your power input if you had only planned for one color to be on at once. All-on might be a bad choice; perhaps 30% or less might be better...
But I'm not sure if there's enough room in the PICs for that much more code -- I'll defer to Phil (Guru Extrordinaire) on that score...
🙂
