Renard DMX
 
Notifications
Clear all

Renard DMX

28 Posts
9 Users
0 Reactions
14.6 K Views
Posts: 118
Topic starter
(@larry-hazeltine)
Estimable Member
Joined: 17 years ago
[#8337]

Christmasinshirley.com has the .asm code for DMX (beta) but my software only imports .hex
kostyun.com has a broken link for the .hex version.

Does anyone have the .hex version of the DMX firmware?


27 Replies
RPM
Posts: 1080
 RPM
(@rpm)
Noble Member
Joined: 19 years ago

I've attached the hex code for you.


Reply
RavingLunatic
Posts: 1502
(@ravinglunatic)
Noble Member
Joined: 19 years ago

You really need to be able to do your own conversion. The DMX start address is currently hard coded in the firmware.

Check this thread for info on how to program PICs (including converting from .asm to .hex):

http://doityourselfchristmas.com/forums/showthread.php?t=490


Reply
Posts: 90
(@lakewood)
Estimable Member
Joined: 18 years ago

Hi Larry Hazeltine

I downloaded MPASMWIN from http://www.melabs.com/support/mpasm.htm and use it to convert asm code to the hex code required. It's free and works just great. WayneJ has a video tutorial ( http://doityourselfchristmas.com/forums/showthread.php?t=490 ) that shows you just what you need.

Hope that helps.
-Robert


Reply
Posts: 118
Topic starter
(@larry-hazeltine)
Estimable Member
Joined: 17 years ago
RavingLunatic wrote:You really need to be able to do your own conversion. The DMX start address is currently hard coded in the firmware.

Check this thread for info on how to program PICs (including converting from .asm to .hex):

http://doityourselfchristmas.com/forums/showthread.php?t=490

I know nothing about programming. How do I adjust the DMX addresses? I have 4 LOR controllers (currently set as units 1-4) and am adding 2 Renard 24 controllers (for now).


Reply
Posts: 118
Topic starter
(@larry-hazeltine)
Estimable Member
Joined: 17 years ago
lakewood wrote:Hi Lazy...

No need to be rude.

I haven't programmed my own chips before, so I came here for help. It may have been intuitive for you to find that particular software, but not everyone has the same experience. That webpage doesn't look like it fits my needs, so even if I had searched longer to find it I probably would have skipped it anyway.


Reply
Posts: 90
(@lakewood)
Estimable Member
Joined: 18 years ago
Larry Hazeltine wrote:No need to be rude.

I haven't programmed my own chips before, so I came here for help. It may have been intuitive for you to find that particular software, but not everyone has the same experience. That webpage doesn't look like it fits my needs, so even if I had searched longer to find it I probably would have skipped it anyway.

Sorry Larry - that wasn't meant to be rude. I'm a little dyslexic sometimes and get my letters and words messed up. Sorry. 🙂


Reply
RavingLunatic
Posts: 1502
(@ravinglunatic)
Noble Member
Joined: 19 years ago
Larry Hazeltine wrote:I know nothing about programming. How do I adjust the DMX addresses? I have 4 LOR controllers (currently set as units 1-4) and am adding 2 Renard 24 controllers (for now).

The DMX address is set in the firmware in this line:

#define DMX_START_ADDRESS 1

You can edit the .asm file in any text editor and just change the value to what ever you want it to be and save it. Then follow the instructions for converting .asm to .hex in the post supplied before.


Reply
RPM
Posts: 1080
 RPM
(@rpm)
Noble Member
Joined: 19 years ago
RPM wrote:I've attached the hex code for you.

FYI, this hex file has a DMX start address of 1.


Reply
Posts: 118
Topic starter
(@larry-hazeltine)
Estimable Member
Joined: 17 years ago

Thanks for the help!


Reply
Page 1 / 3
Share: