Question for Renard...
 
Notifications
Clear all

Question for Renard-DMX firmware users

18 Posts
10 Users
0 Reactions
7,560 Views
RavingLunatic
Posts: 1502
Topic starter
(@ravinglunatic)
Noble Member
Joined: 19 years ago
[#23505]

To clarify: I am looking for inputs from actual Renard-DMX firmware users, not from people who think they know the answer.

The question:

Once your display was setup, did you ever have to change your DMX start address on any of your Renard controllers?

Reason behind the question:

Every year (at some point) there is a request to change the firmware to be able to change the DMX start address without having to pull the PIC for reprogramming. I’m just curious to see how often the start address needed to be changed once the display was setup.


During setup I can see where you might need to update the start address but I don’t see much difference in the level of effort of pulling the PIC to reprogram versus setting up a special VIXEN sequence to set the DMX address. Of course this is based on the belief that people actually checkout their hardware before taking it outside to put in the display. Actual users may have a different viewpoint on the issue.

RL


17 Replies
klyneshouse
Posts: 230
(@klyneshouse)
Reputable Member
Joined: 16 years ago

No changes here -
Running 3 universes/11 controllers with all starts at "1" - on the orignial planned layout established months ago.

What you explaining would be a cool luxury as i would like to remove my small ugly incan mega tree today (2x 24ss) and set the remaining 48lsd to 49, and its kinda cold outside..


Reply
Posts: 1792
(@barbotte)
Noble Member
Joined: 17 years ago

went my set up is done i dont change adress. but before the set up sometime i would change adress as i am runnign wireless and some ( not all ) of my controler change area or i add more ...my when its there ..its there
cheer


Reply
rokkett
Posts: 441
(@rokkett)
Reputable Member
Joined: 17 years ago

I don't change them from the default start address of 1. Yes, they using the DMX protocol, but the Renard positional self-addressing. I just make adjustments as any Renard user would do if they rearranged their controller configuration.


Reply
RavingLunatic
Posts: 1502
Topic starter
(@ravinglunatic)
Noble Member
Joined: 19 years ago
klyneshouse wrote:No changes here -
Running 3 universes/11 controllers with all starts at "1" - on the orignial planned layout established months ago.

What you explaining would be a cool luxury as i would like to remove my small ugly incan mega tree today (2x 24ss) and set the remaining 48lsd to 49, and its kinda cold outside..

So in this situation you would remove your mega tree (I guess it didn't turn out the way you wanted it to:sad:) and move your DMX input to your 48lsd and reset your 48lsd start address to 49, correct? (just making sure I understand what you are thinking)

So for you, if the capability existed in your controllers now you would take advantage of it, correct?

RL


Reply
Page 1 / 4
Share: