Notifications
Clear all
May 02, 2017 10:59 am
As long as you see this:
Target Device ID (0x0)
Then you are not really talking to the PIC and you are back to looking at wiring
May 02, 2017 12:00 pm
MartinMueller2003 wrote:As long as you see this:Target Device ID (0x0)
Then you are not really talking to the PIC and you are back to looking at wiring
WOW! OK, that explains a lot. So here is how I connect from the Pickit3 to the chip (see pix).
From what I found:
Pickit 3 PIC
1 (w/ arrow) Blue - Pin 3
2 Green ------------ Pin 1
3 Yellow ------------ Pin 14
4 Orange ----------- Pin 13
5 Red --------------- Pin 12
6 Brown - not used
May 02, 2017 12:25 pm
If you're trying to program a 16F688 I think you need to move the blue wire from pin 3 to pin 4 on the PIC.
May 02, 2017 12:39 pm
dvc2013 wrote:If you're trying to program a 16F688 I think you need to move the blue wire from pin 3 to pin 4 on the PIC.
Got it! Green 1, Blue 4 all else the same. Unfortunately, same results.
BTW - Thanks!
Page 9 / 9
Prev



